Home » Publizieren » Open Access » Finanzierung » Publikationsfonds » Artikel aus dem Publikationsfonds

Artikel aus dem Publikationsfonds

Übersicht über die APC-Zahlungen der TU Hamburg: OpenAPC

Folgende Zeitschriftenartikel wurden über den Open Access Publikationsfonds der TUHH gefördert:

2024

  1. Widderich, N., Bubenheim, P., & Liese, A. (2024). Online monitoring of phytate content in plant residuals during wet-treatment. Scientific Reports, 14(1), 612. https://doi.org/10.1038/s41598-023-49950-0
  2. Brandt, J., Dittrich, G., Thelen, M., Renner, H., Huber, P., Eich, M., & Petrov, A. (2024). On the applicability of the Maxwell Garnett effective medium model to media with a high density of cylindrical pores. Optical Materials Express, 14(4), 871. https://doi.org/10.1364/OME.516125
  3. Jiang, Y., & Renner, B.-C. (2024). Low-Cost Underwater Swarm Acoustic Localization: A Review. IEEE Access, 12, 25779–25796. https://doi.org/10.1109/ACCESS.2024.3357359
  4. Röver, T., Fuchs, C., Asami, K., & Emmelmann, C. (2024). Dimensioning of Biomimetic Beams under Bending for Additively Manufactured Structural Components. Biomimetics, 9(4), 214. https://doi.org/10.3390/biomimetics9040214
  5. Schulz, C. W., Netzband, S., Özinan, U., Cheng, P. W., & Abdel-Maksoud, M. (2024). Wind turbine rotors in surge motion: New insights into unsteady aerodynamics of floating offshore wind turbines (FOWTs) from experiments and simulations. Wind Energy Science, 9(3), 665–695. https://doi.org/10.5194/wes-9-665-2024
  6. Eckel, C., Babazadeh, D., & Becker, C. (2024). Classification of Converter-Driven Stability and Suitable Modeling and Analysis Methods. IEEE Access, 12, 53056–53073. https://doi.org/10.1109/ACCESS.2024.3388098
  7. Klost, M., Keil, C., & Gurikov, P. (2024). Dried Porous Biomaterials from Mealworm Protein Gels: Proof of Concept and Impact of Drying Method on Structural Properties and Zinc Retention. Gels, 10(4), 275. https://doi.org/10.3390/gels10040275

2023

  1. Nevermann, H., Becerra Gomez, J. N., Fröhle, P., & Shokri, N. (2023). Land loss implications of sea level rise along the coastline of Colombia under different climate change scenarios. Climate Risk Management, 39, 100470. https://doi.org/10.1016/j.crm.2022.100470 
  2. Kotobi, A., Schwob, L., Vonbun-Feldbauer, G. B., Rossi, M., Gasparotto, P., Feiler, C., Berden, G., Oomens, J., Oostenrijk, B., Scuderi, D., Bari, S., & Meißner, R. H. (2023). Reconstructing the infrared spectrum of a peptide from representative conformers of the full canonical ensemble. Communications Chemistry, 6(1), 46. https://doi.org/10.1038/s42004-023-00835-3 
  3. Gollmer, C., Weigel, V., & Kaltschmitt, M. (2023). Emission Mitigation by Aluminum-Silicate-Based Fuel Additivation of Wood Chips with Kaolin and Kaolinite. Energies, 16(7), 3095. https://doi.org/10.3390/en16073095 
  4. Guo, J., Luo, C., Wittkowski, C., Fehr, I., Chong, Z., Kitzberger, M., Alassali, A., Zhao, X., Leineweber, R., Feng, Y., & Kuchta, K. (2023). Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging. Polymers, 15(9), 2220. https://doi.org/10.3390/polym15092220 
  5. Laukotka, F. N., & Krause, D. (2023). Supporting Digital Twins for the Retrofit in Aviation by a Model-Driven Data Handling. Systems, 11(3), 142. https://doi.org/10.3390/systems11030142 
  6. Nevermann, H., AghaKouchak, A., & Shokri, N. (2023). Sea level rise implications on future inland migration of coastal wetlands. Global Ecology and Conservation, 43, e02421. https://doi.org/10.1016/j.gecco.2023.e02421 
  7. Schroeter, B., Jeansathawong, P., Hajnal, A., & Gurikov, P. (2023). Wet Milling of Alginate Alco‐ and Hydrogel Composites: A Facile Top‐Down Approach for Continuous Production of Aerogel Microparticles. Macromolecular Materials and Engineering, 2200674. https://doi.org/10.1002/mame.202200674 
  8. Kuchemüller, K. B., Pörtner, R., & Möller, J. (2023). Design of cell expansion processes for adherent‐growing cells with mDoE‐workflow. Engineering in Life Sciences, 23(5), e2200059. https://doi.org/10.1002/elsc.202200059 
  9. Neidhardt, M., Mieling, R., Bengs, M., & Schlaefer, A. (2023). Optical force estimation for interactions between tool and soft tissues. Scientific Reports, 13(1), 506. https://doi.org/10.1038/s41598-022-27036-7 
  10. Shah, T. M., Khan, A. H., Nicholls, C., Sohoo, I., & Otterpohl, R. (2023). Using Landfill Sites and Marginal Lands for Socio-Economically Sustainable Biomass Production through Cultivation of Non-Food Energy Crops: An Analysis Focused on South Asia and Europe. Sustainability, 15(6), 4923. https://doi.org/10.3390/su15064923 
  11. Wollak, B., Espinoza, D., Dippel, A.-C., Sturm, M., Vrljic, F., Gutowski, O., Nielsen, I. G., Sheppard, T. L., Korup, O., & Horn, R. (2023). Catalytic reactor for operando spatially resolved structure–activity profiling using high-energy X-ray diffraction. Journal of Synchrotron Radiation, 30(3), 571–581. https://doi.org/10.1107/S1600577523001613 
  12. Klose, L., Meyer-Heydecke, N., Wongwattanarat, S., Chow, J., Pérez García, P., Carré, C., Streit, W., Antranikian, G., Romero, A. M., & Liese, A. (2023). Towards Sustainable Recycling of Epoxy-Based Polymers: Approaches and Challenges of Epoxy Biodegradation. Polymers, 15(12), 2653. https://doi.org/10.3390/polym15122653
  13. Müller, P. M., Bletsos, G., & Rung, T. (2023). Shape Transformation Approaches for Fluid Dynamic Optimization. Aerospace, 10(6), 519. https://doi.org/10.3390/aerospace10060519
  14. Büsch, L., Koch, J., Schoepflin, D., Schulze, M., & Schüppstuhl, T. (2023). Towards Recognition of Human Actions in Collaborative Tasks with Robots: Extending Action Recognition with Tool Recognition Methods. Sensors, 23(12), 5718. https://doi.org/10.3390/s23125718
  15. Eixenberger, D., Kumar, A., Klinger, S., Scharnagl, N., Dawood, A. W. H., & Liese, A. (2023). Polymer-Grafted 3D-Printed Material for Enzyme Immobilization—Designing a Smart Enzyme Carrier. Catalysts, 13(7), 1130. https://doi.org/10.3390/catal13071130
  16. Erhardt, S., Koch, M., Kiefer, A., Veith, M., Weigel, R., & Koelpin, A. (2023). Mobile-BAT—A Novel Ultra-Low Power Wildlife Tracking System. Sensors, 23(11), 5236. https://doi.org/10.3390/s23115236
  17. Herzog, J., Mook, A., Utesch, T., Bengelsdorf, F. R., & Zeng, A.-P. (2023). Lactate based caproate production with Clostridium drakei and process control of Acetobacterium woodii via lactate dependent in situ electrolysis. Frontiers in Bioengineering and Biotechnology, 11, 1212044. https://doi.org/10.3389/fbioe.2023.1212044
  18. Koch, J., Büchse, C., & Schüppstuhl, T. (2023). Development and Integration of a Workpiece-Based Calibration Method for an Optical Assistance System. Applied Sciences, 13(13), 7369. https://doi.org/10.3390/app13137369
  19. Prünte, P., Schoepflin, D., & Schüppstuhl, T. (2023). A Comparative Study of Visual Identification Methods for Highly Similar Engine Tubes in Aircraft Maintenance, Repair and Overhaul. Sensors, 23(15), 6779. https://doi.org/10.3390/s23156779
  20. Venzke, M., Shudrenko, Y., Youssfi, A., Steffen, T., Turau, V., & Becker, C. (2023). Co-Simulation of a Cellular Energy System. Energies16(17), 6150. https://doi.org/10.3390/en16176150
  21. Radtke, L., Bletsos, G., Kühl, N., Suchan, T., Rung, T., Düster, A., & Welker, K. (2023). Parameter-Free Shape Optimization: Various Shape Updates for Engineering Applications. Aerospace, 10(9), 751. https://doi.org/10.3390/aerospace10090751
  22. Hanna, M., Wöller, L.-N., Dambietz, F. M., & Krause, D. (2023). A Model-Based Approach for the Methodical Development and Configuration of Modular Product Families. Systems, 11(9), 449. https://doi.org/10.3390/systems11090449
  23. Abbasimoshaei, A., Chinnakkonda Ravi, A. K., & Kern, T. A. (2023). Development of a New Control System for a Rehabilitation Robot Using Electrical Impedance Tomography and Artificial Intelligence. Biomimetics, 8(5), 420. https://doi.org/10.3390/biomimetics8050420
  24. Malvis Romero, A., Picado Morales, J. J., Klose, L., & Liese, A. (2023). Enzyme-Assisted Extraction of Ulvan from the Green Macroalgae Ulva fenestrata. Molecules, 28(19), 6781. https://doi.org/10.3390/molecules28196781
  25. Rennpferdt, C., Zuefle, M., Bagusat, M., Bender, D., & Krause, D. (2023). Development of Modular Architectures for Product–Service Systems. Sustainability, 15(18), 14001. https://doi.org/10.3390/su151814001
  26. Lohmann, J., Kölzer, T., Schaan, G., & Schmidt‐Döhl, F. (2023). Self‐organizing systems in the construction industry. Engineering Reports, e12692. https://doi.org/10.1002/eng2.12692
  27. Mittelhaus, J., Röttger, P., Schill, E., Jacobs, J., & Fiedler, B. (2023). Investigation of the ductile deformation potential of microscale epoxy materials. Polymer Testing, 128, 108217. https://doi.org/10.1016/j.polymertesting.2023.108217
  28. Sankowski, O., & Krause, D. (2023). The Human-Centredness Metric: Early Assessment of the Quality of Human-Centred Design Activities. Applied Sciences13(21), 12090. https://doi.org/10.3390/app132112090
  29. Del Río, J. I., Juhász, L., Kalmár, J., Erdélyi, Z., Bermejo, M. D., Martín, Á., Smirnova, I., Gurikov, P., & Schroeter, B. (2023). A greener approach for synthesizing metal-decorated carbogels from alginate for emerging technologies. Nanoscale Advances5(23), 6635–6646. https://doi.org/10.1039/D3NA00444A
  30. Ohde, D., Thomas, B., Bubenheim, P., & Liese, A. (2023). Enzymatic Carboxylation of Resorcinol in Aqueous Triethanolamine at Elevated CO2 Pressure. Molecules29(1), 25. https://doi.org/10.3390/molecules29010025
  31. Peralta Abadia, P., Ahmad, M. E., & Smarsly, K. (2023). Printing Information Modeling (PIM) for Additive Manufacturing of Concrete Structures. Applied Sciences13(23), 12664. https://doi.org/10.3390/app132312664
  32. Sayoga, G. V., Bueschler, V. S., Beisch, H., Utesch, T., Holtmann, D., Fiedler, B., Ohde, D., & Liese, A. (2023). Electrochemical H2O2—Stat mode as reaction concept to improve the process performance of an unspecific peroxygenase. New Biotechnology78, 95–104. https://doi.org/10.1016/j.nbt.2023.10.007
  33. Zimmermann, A., Scherzinger, M., & Kaltschmitt, M. (2023). Process options for the recovery of a pentosan-enriched fraction from wheat-based bioethanol thin stillage. Bioresources and Bioprocessing10(1), 59. https://doi.org/10.1186/s40643-023-00679-8

2022

  1. Hellmers, S., & Fröhle, P. (2022). Computation of backwater effects in surface waters of lowland catchments including control structures – an efficient and re-usable method implemented in the hydrological open-source model Kalypso-NA (4.0). Geoscientific Model Development, 15(3), 1061–1077. https://doi.org/10.5194/gmd-15-1061-2022 
  2. Pache, R., & Rung, T. (2022). Data-driven surrogate modeling of aerodynamic forces on the superstructure of container vessels. Engineering Applications of Computational Fluid Mechanics, 16(1), 746–763. https://doi.org/10.1080/19942060.2022.2044383 
  3. Braun, M., Dörner, A., ter Veer, K. F., Willems, T., Seidel, M., Hendrikse, H., Høyland, K. V., Fischer, C., & Ehlers, S. (2022). Development of Combined Load Spectra for Offshore Structures Subjected to Wind, Wave, and Ice Loading. Energies, 15(2), 559. https://doi.org/10.3390/en15020559 
  4. Nagi, A., & Kersten, W. (2022). A Process Model for Cooperative Risk Management in Seaports. Sustainability, 14(3), 1662. https://doi.org/10.3390/su14031662 
  5. Lamp, A., Kaltschmitt, M., & Dethloff, J. (2022). Options to Improve the Mechanical Properties of Protein-Based Materials. Molecules, 27(2), 446. https://doi.org/10.3390/molecules27020446 
  6. Cinar, S. Ö., Cinar, S., & Kuchta, K. (2022). Machine Learning Algorithms for Temperature Management in the Anaerobic Digestion Process. Fermentation, 8(2), 65. https://doi.org/10.3390/fermentation8020065 
  7. Gibhardt, D., Buggisch, C., Meyer, D., & Fiedler, B. (2022). Hygrothermal Aging History of Amine-Epoxy Resins: Effects on Thermo-Mechanical Properties. Frontiers in Materials, 9, 826076. https://doi.org/10.3389/fmats.2022.826076 
  8. Widderich, N., Mayer, N., Ruff, A. J., Reckels, B., Lohkamp, F., Visscher, C., Schwaneberg, U., Kaltschmitt, M., Liese, A., & Bubenheim, P. (2022). Conditioning of Feed Material Prior to Feeding: Approaches for a Sustainable Phosphorus Utilization. Sustainability, 14(7), 3998. https://doi.org/10.3390/su14073998 
  9. Sohoo, I., Ritzkowski, M., Sultan, M., Farooq, M., & Kuchta, K. (2022). Conceptualization of Bioreactor Landfill Approach for Sustainable Waste Management in Karachi, Pakistan. Sustainability, 14(6), 3364. https://doi.org/10.3390/su14063364 
  10. John, D., & Kaltschmitt, M. (2022). Control of a PVT-Heat-Pump-System Based on Reinforcement Learning–Operating Cost Reduction through Flow Rate Variation. Energies, 15(7), 2607. https://doi.org/10.3390/en15072607 
  11. Xu, Y., Ren, J., Wang, W., & Zeng, A. (2022). Improvement of glycine biosynthesis from one‐carbon compounds and ammonia catalyzed by the glycine cleavage system in vitro. Engineering in Life Sciences, 22(1), 40–53. https://doi.org/10.1002/elsc.202100047 
  12. Hong, Y., Nguyen, T., Arbter, P., Utesch, T., & Zeng, A. (2022). Phenotype analysis of cultivation processes via unsupervised machine learning: Demonstration for Clostridium pasteurianum. Engineering in Life Sciences, 22(2), 85–99. https://doi.org/10.1002/elsc.202100114 
  13. Hassani, A., Azapagic, A., & Shokri, N. (2021). Global predictions of primary soil salinization under changing climate in the 21st century. Nature Communications, 12(1), 6663. https://doi.org/10.1038/s41467-021-26907-3 
  14. Böhm, A. M., Herrnring, H., & von Bock und Polach, F. (2022). Data from uniaxial compressive testing of laboratory-made granular ice. Data in Brief, 42, 108236. https://doi.org/10.1016/j.dib.2022.108236 
  15. Lasser, J., Schneider, J., Lösch, T., Röwert, R., Heck, T., Bluemel, C., Neufend, M., Steinhardt, I., & Skupien, S. (2022). MapOSR – A mapping review dataset of empirical studies on Open Science. F1000Research, 11, 535. https://doi.org/10.12688/f1000research.121665.1 
  16. Dymala, T., Wang, S., Jarolin, K., Song, T., Shen, L., Dosta, M., & Heinrich, S. (2022). MP-PIC Simulation of Biomass Steam Gasification Using Ilmenite as an Oxygen Carrier. Atmosphere, 13(7), 1009. https://doi.org/10.3390/atmos13071009 
  17. Cinar, S., Önen Cinar, S., Staudter, C., & Kuchta, K. (2022). Operational Excellence in a Biogas Plant through Integration of Lean Six Sigma Methodology. Designs, 6(4), 61. https://doi.org/10.3390/designs6040061 
  18. Kruber, K. F., & Skiborowski, M. (2022). Topology-Based Initialization for the Optimization-Based Design of Heteroazeotropic Distillation Processes. Processes, 10(8), 1482. https://doi.org/10.3390/pr10081482 
  19. Patzke, J., Nehlsen, E., Fröhle, P., & Hesse, R. F. (2022). Spatial and Temporal Variability of Bed Exchange Characteristics of Fine Sediments From the Weser Estuary. Frontiers in Earth Science, 10, 916056. https://doi.org/10.3389/feart.2022.916056 
  20. Langer, M., Jamal, M. U., Conklin, A., & Ernst, M. (2022). Chromium Removal in the Presence of NOM during Fe(II) Reductive Precipitation for Drinking Water Treatment. Water, 14(18), 2903. https://doi.org/10.3390/w14182903 
  21. Schulz, C. W., Wang, K., Wieczorek, K., Netzband, S., & Abdel‐Maksoud, M. (2022). Experimental and numerical investigation of the yaw moment of a downwind coned wind turbine rotor. Wind Energy, we.2779. https://doi.org/10.1002/we.2779 
  22. Steinbrecher, T., Bonk, F., Scherzinger, M., Lüdtke, O., & Kaltschmitt, M. (2022). Fractionation of Lignocellulosic Fibrous Straw Digestate by Combined Hydrothermal and Enzymatic Treatment. Energies, 15(17), 6111. https://doi.org/10.3390/en15176111 
  23. Wesselhöft, M., Hinckeldeyn, J., & Kreutzfeldt, J. (2022). Controlling Fleets of Autonomous Mobile Robots with Reinforcement Learning: A Brief Survey. Robotics, 11(5), 85. https://doi.org/10.3390/robotics11050085 
  24. Meyer, F., Gasimov, N., Bubenheim, P., & Waluga, T. (2022). Concept of an Enzymatic Reactive Extraction Centrifuge. Processes, 10(10), 2137. https://doi.org/10.3390/pr10102137 
  25. Niehaus, D., Hofmann, S., Kumar, S. B., Hoffmann, M., Cisneros-Aguirre, J., & Schlüter, M. (2022). Experimental Characterisation and Field Experience of a Reusable, Modified Polyurethane Foam for the Mechanical Clean-Up of Oil Spills on the Sea Surface. Journal of Marine Science and Engineering, 10(10), 1369. https://doi.org/10.3390/jmse10101369 
  26. Chan, T. T., Heinrich, S., Grabe, J., & Dosta, M. (2022). Microscale Modeling of Frozen Particle Fluid Systems with a Bonded-Particle Model Method. Materials, 15(23), 8505. https://doi.org/10.3390/ma15238505 
  27. Depta, P. N., Dosta, M., Wenzel, W., Kozlowska, M., & Heinrich, S. (2022). Hierarchical Coarse-Grained Strategy for Macromolecular Self-Assembly: Application to Hepatitis B Virus-Like Particles. International Journal of Molecular Sciences, 23(23), 14699. https://doi.org/10.3390/ijms232314699 
  28. Grube, M., Wieck, J. C., & Seifried, R. (2022). Comparison of Modern Control Methods for Soft Robots. Sensors, 22(23), 9464. https://doi.org/10.3390/s22239464 
  29. Guo, J., Kim, Y., Chong, Z. K., Alassali, A., Chacon, J. P., Gottschalk, D., Kitzberger, M., & Kuchta, K. (2022). Quality Changes of Low-Density Polyethylene (LDPE) Recyclates from the Pretreatment Process with a Cationic Surfactant and a Nonionic Surfactant as Cleaning Agents Upstream of Extrusion. Processes, 10(11), 2174. https://doi.org/10.3390/pr10112174 
  30. Kursula, L., Kexel, F., Fitschen, J., Hoffmann, M., Schlüter, M., & von Kameke, A. (2022). Unsteady Mass Transfer in Bubble Wakes Analyzed by Lagrangian Coherent Structures in a Flat-Bed Reactor. Processes, 10(12), 2686. https://doi.org/10.3390/pr10122686 
  31. Schuster, J., Huber, J., Stumme, J., Grieb, A., & Ernst, M. (2022). Combining real-time fluorescence spectroscopy and flow cytometry to reveal new insights in DOC and cell characterization of drinking water. Frontiers in Environmental Chemistry, 3, 931067. https://doi.org/10.3389/fenvc.2022.931067 

2021

  1. Johannsen, J., Baek, G., Fieg, G., & Waluga, T. (2021). An innovative approach for fatty acid reduction to fatty aldehydes. Green Chemistry Letters and Reviews, 14(3), 455–461. https://doi.org/10.1080/17518253.2021.1943006 
  2. Hein, S. S. V., Sohrt, V., Nehlsen, E., Strotmann, T., & Fröhle, P. (2021). Tidal Oscillation and Resonance in Semi-Closed Estuaries—Empirical Analyses from the Elbe Estuary, North Sea. Water, 13(6), 848. https://doi.org/10.3390/w13060848 
  3. Dreier, N., Nehlsen, E., Fröhle, P., Rechid, D., Bouwer, L., & Pfeifer, S. (2021). Future Changes in Wave Conditions at the German Baltic Sea Coast Based on a Hybrid Approach Using an Ensemble of Regional Climate Change Projections. Water, 13(2), 167. https://doi.org/10.3390/w13020167 
  4. Shah, T. M., Nasika, D. P. B., & Otterpohl, R. (2021). Plant and Weed Identifier Robot as an Agroecological Tool Using Artificial Neural Networks for Image Identification. Agriculture, 11(3), 222. https://doi.org/10.3390/agriculture11030222 
  5. Stumme, J., Ashokkumar, O., Dillmann, S., Niestroj-Pahl, R., & Ernst, M. (2021). Theoretical Evaluation of Polyelectrolyte Layering during Layer-by-Layer Coating of Ultrafiltration Hollow Fiber Membranes. Membranes, 11(2), 106. https://doi.org/10.3390/membranes11020106 
  6. Minliang, C., Chengwei, M., Lin, C., & Zeng, A.-P. (2021). Integrated laboratory evolution and rational engineering of GalP/Glk-dependent Escherichia coli for higher yield and productivity of L-tryptophan biosynthesis. Metabolic Engineering Communications, 12, e00167. https://doi.org/10.1016/j.mec.2021.e00167 
  7. Bletsos, G., Kühl, N., & Rung, T. (2021). Adjoint-based shape optimization for the minimization of flow-induced hemolysis in biomedical applications. Engineering Applications of Computational Fluid Mechanics, 15(1), 1095–1112. https://doi.org/10.1080/19942060.2021.1943532 
  8. Sohoo, I., Ritzkowski, M., Sohu, Z. A., Cinar, S. Ö., Chong, Z. K., & Kuchta, K. (2021). Estimation of Methane Production and Electrical Energy Generation from Municipal Solid Waste Disposal Sites in Pakistan. Energies, 14(9), 2444. https://doi.org/10.3390/en14092444 
  9. Al-Najjar, M. A. A., Athamneh, T., AbuTayeh, R., Basheti, I., Leopold, C., Gurikov, P., & Smirnova, I. (2021). Evaluation of the orally administered calcium alginate aerogel on the changes of gut microbiota and hepatic and renal function of Wistar rats. PLOS ONE, 16(4), e0247633. https://doi.org/10.1371/journal.pone.0247633 
  10. Fischer, S., Polster, V., Ruhr, M., Hube, R., & Morlock, M. M. (2021). Osteolysis following PE Wear of a Hastings Head on a Monoblock Hip Stem. Case Reports in Orthopedics, 2021, 1–7. https://doi.org/10.1155/2021/9989395 
  11. Shah, T. M., Tasawwar, S., & Otterpohl, R. (2021). Agroecology for Food and Water Security in Times of Climate Consciousness: A Bibliometric Analysis of Peer-Reviewed Literature Published from 1990 to 2020. Sustainability, 13(9), 5064. https://doi.org/10.3390/su13095064 
  12. Papangelo, A. (2021). On the Effect of a Rate-Dependent Work of Adhesion in the Detachment of a Dimpled Surface. Applied Sciences, 11(7), 3107. https://doi.org/10.3390/app11073107 
  13. Ihrens, J., Möws, S., Wilkening, L., Kern, T. A., & Becker, C. (2021). The Impact of Time Delays for Power Hardware-in-the-Loop Investigations. Energies, 14(11), 3154. https://doi.org/10.3390/en14113154 
  14. Nagi, A., Schroeder, M., & Kersten, W. (2021). Risk Management in Seaports: A Community Analysis at the Port of Hamburg. Sustainability, 13(14), 8035. https://doi.org/10.3390/su13148035 
  15. Aslam, M. M.-A., Kuo, H.-W., Den, W., Usman, M., Sultan, M., & Ashraf, H. (2021). Functionalized Carbon Nanotubes (CNTs) for Water and Wastewater Treatment: Preparation to Application. Sustainability, 13(10), 5717. https://doi.org/10.3390/su13105717 
  16. Gronwald, P.-O., & Kern, T. A. (2021). Experimental Validation and Parameter Study of a 2D Geometry-Based, Flexible Designed Thermal Motor Model for Different Cooled Traction Motor Drives. World Electric Vehicle Journal, 12(2), 76. https://doi.org/10.3390/wevj12020076 
  17. Khan, M. U., Ahmad, M., Sultan, M., Sohoo, I., Ghimire, P. C., Zahid, A., Sarwar, A., Farooq, M., Sajjad, U., Abdeshahian, P., & Yousaf, M. (2021). Biogas Production Potential from Livestock Manure in Pakistan. Sustainability, 13(12), 6751. https://doi.org/10.3390/su13126751 
  18. Abis, M., Bruno, M., Simon, F.-G., Grönholm, R., Hoppe, M., Kuchta, K., & Fiore, S. (2021). A Novel Dry Treatment for Municipal Solid Waste Incineration Bottom Ash for the Reduction of Salts and Potential Toxic Elements. Materials, 14(11), 3133. https://doi.org/10.3390/ma14113133 
  19. Langer, C., & Ay, N. (2021). How Morphological Computation Shapes Integrated Information in Embodied Agents. Frontiers in Psychology, 12, 716433. https://doi.org/10.3389/fpsyg.2021.716433 
  20. Konow, T., Bätz, J., Beverland, D., Board, T., Lampe, F., Püschel, K., & Morlock, M. M. (2022). Variability in Femoral Preparation and Implantation Between Surgeons Using Manual and Powered Impaction in Total Hip Arthroplasty. Arthroplasty Today, 14, 14–21. https://doi.org/10.1016/j.artd.2021.10.005 
  21. Picuno, C., Van Eygen, E., Brouwer, M. T., Kuchta, K., & Thoden van Velzen, E. U. (2021). Factors Shaping the Recycling Systems for Plastic Packaging Waste—A Comparison between Austria, Germany and The Netherlands. Sustainability, 13(12), 6772. https://doi.org/10.3390/su13126772 
  22. Gaafar, M. A., Renner, H., Eich, M., & Petrov, A. Yu. (2021). Fourier optics with linearly tapered waveguides: Light trapping and focusing. APL Photonics, 6(6), 066108. https://doi.org/10.1063/5.0050770 
  23. Dragutinović, N., Höfer, I., & Kaltschmitt, M. (2021). Fuel Improvement Measures for Particulate Matter Emission Reduction during Corn Cob Combustion. Energies, 14(15), 4548. https://doi.org/10.3390/en14154548 
  24. Drücker, S., Lüdeker, J. K., Blecken, M., Kurt, A., Betz, K., Kriegesmann, B., & Fiedler, B. (2022). Probabilistic analysis of additively manufactured polymer lattice structures. Materials & Design, 213, 110300. https://doi.org/10.1016/j.matdes.2021.110300 
  25. Conrad, M., & Smirnova, I. (2021). Counter-Current Suspension Extraction Process of Lignocellulose in Biorefineries to Reach Low Water Consumption, High Extraction Yields, and Extract Concentrations. Processes, 9(9), 1585. https://doi.org/10.3390/pr9091585 
  26. Thormann, L., Neuling, U., & Kaltschmitt, M. (2021). Opportunities and Challenges of the European Green Deal for the Chemical Industry: An Approach Measuring Innovations in Bioeconomy. Resources, 10(9), 91. https://doi.org/10.3390/resources10090091 
  27. Maruthavanan, D., Seibel, A., & Schlattmann, J. (2021). Fluid-Structure Interaction Modelling of a Soft Pneumatic Actuator. Actuators, 10(7), 163. https://doi.org/10.3390/act10070163 
  28. Sun, M., Ülker, Z., Chen, Z., Deeptanshu, S., Johannsen, M., Erkey, C., & Gurikov, P. (2021). Development and Validation of Retention Models in Supercritical Fluid Chromatography for Impregnation Process Design. Applied Sciences, 11(15), 7106. https://doi.org/10.3390/app11157106 
  29. Makama, A., Kuladinithi, K., & Timm-Giel, A. (2021). Wireless Geophone Networks for Land Seismic Data Acquisition: A Survey, Tutorial and Performance Evaluation. Sensors, 21(15), 5171. https://doi.org/10.3390/s21155171 
  30. Alassali, A., Picuno, C., Chong, Z. K., Guo, J., Maletz, R., & Kuchta, K. (2021). Towards Higher Quality of Recycled Plastics: Limitations from the Material’s Perspective. Sustainability, 13(23), 13266. https://doi.org/10.3390/su132313266 
  31. Spille, C., Tholan, V. P., Straiton, B., Johannsen, M., Hoffmann, M., Marashdeh, Q., & Schlüter, M. (2021). Electrical Capacitance Volume Tomography (ECVT) for Characterization of Additively Manufactured Lattice Structures (AMLS) in Gas-Liquid Systems. Fluids, 6(9), 321. https://doi.org/10.3390/fluids6090321 
  32. Buggisch, C., Gibhardt, D., Felmet, N., Tetzner, Y., & Fiedler, B. (2021). Strain sensing in GFRP via fully integrated carbon nanotube epoxy film sensors. Composites Part C: Open Access, 6, 100191. https://doi.org/10.1016/j.jcomc.2021.100191 
  33. Schroeter, B., Jung, I., Bauer, K., Gurikov, P., & Smirnova, I. (2021). Hydrophobic Modification of Biopolymer Aerogels by Cold Plasma Coating. Polymers, 13(17), 3000. https://doi.org/10.3390/polym13173000 
  34. Spalek, N., Brunow, J., Braun, M., & Rutner, M. (2021). WAAM-Fabricated Laminated Metal Composites. Metals, 11(12), 1948. https://doi.org/10.3390/met11121948 
  35. Song, S., Braun, M., Wiegard, B., Herrnring, H., & Ehlers, S. (2021). Combining H-Adaptivity with the Element Splitting Method for Crack Simulation in Large Structures. Materials, 15(1), 240. https://doi.org/10.3390/ma15010240 
  36. Sohoo, I., Ritzkowski, M., Guo, J., Sohoo, K., & Kuchta, K. (2022). Municipal Solid Waste Management through Sustainable Landfilling: In View of the Situation in Karachi, Pakistan. International Journal of Environmental Research and Public Health, 19(2), 773. https://doi.org/10.3390/ijerph19020773 
  37. Greve, E., Fuchs, C., Hamraz, B., Windheim, M., Rennpferdt, C., Schwede, L.-N., & Krause, D. (2022). Knowledge-Based Decision Support for Concept Evaluation Using the Extended Impact Model of Modular Product Families. Applied Sciences, 12(2), 547. https://doi.org/10.3390/app12020547 
  38. Onen Cinar, S., Nsair, A., Wieczorek, N., & Kuchta, K. (2022). Long-Term Assessment of Temperature Management in an Industrial Scale Biogas Plant. Sustainability, 14(2), 612. https://doi.org/10.3390/su14020612 
  39. Möller, J., & Pörtner, R. (2021). Digital Twins for Tissue Culture Techniques—Concepts, Expectations, and State of the Art. Processes, 9(3), 447. https://doi.org/10.3390/pr9030447 
  40. Sohrt, V., Hein, S. S. V., Nehlsen, E., Strotmann, T., & Fröhle, P. (2021). Model Based Assessment of the Reflection Behavior of Tidal Waves at Bathymetric Changes in Estuaries. Water, 13(4), 489. https://doi.org/10.3390/w13040489 
  41. Thelen, M., Bochud, N., Brinker, M., Prada, C., & Huber, P. (2021). Laser-excited elastic guided waves reveal the complex mechanics of nanoporous silicon. Nature Communications, 12(1), 3597. https://doi.org/10.1038/s41467-021-23398-0 
  42. Heuer, J., Kraus, Y., Vučak, M., & Zeng, A. (2022). Enhanced sequestration of carbon dioxide into calcium carbonate using pressure and a carbonic anhydrase from alkaliphilic Coleofasciculus chthonoplastes. Engineering in Life Sciences, 22(3–4), 178–191. https://doi.org/10.1002/elsc.202100033 
  43. Daniel Barros, M., Hotza, D., & Janssen, R. (2021). Colloidal processing and characterization of TiO 2 –MnO‐doped alumina/alumina slurries and tapes. International Journal of Ceramic Engineering & Science, 3(4), 173–179. https://doi.org/10.1002/ces2.10087 
  44. Daniel Barros, M., Hotza, D., & Janssen, R. (2021). Dopant diffusion at the interface of TiO 2 ‐MnO‐doped alumina/alumina layers in sintered laminates. International Journal of Ceramic Engineering & Science, 3(3), 105–112. https://doi.org/10.1002/ces2.10090 
  45. Hanschke, L., & Renner, C. (2021). EmRep: Energy management relying on state‐of‐charge extrema prediction. IET Computers & Digital Techniques, cdt2.12033. https://doi.org/10.1049/cdt2.12033 
  46. Zhang, C., Sharma, S., Wang, W., & Zeng, A. (2021). A novel downstream process for highly pure 1,3‐propanediol from an efficient fed‐batch fermentation of raw glycerol by Clostridium pasteurianum. Engineering in Life Sciences, 21(6), 351–363. https://doi.org/10.1002/elsc.202100012 
  47. Buggisch, C., Gagani, A., & Fiedler, B. (2021). Capacitance measurements on integrated conductors for detection of matrix cracks in GFRP. Functional Composite Materials, 2(1), 2. https://doi.org/10.1186/s42252-020-00013-x 
  48. Wang, S., Ma, C., & Zeng, A. (2021). Dynamic energy correlation analysis of E. coli aspartokinase III and alteration of allosteric regulation by manipulating energy transduction pathways. Engineering in Life Sciences, 21(5), 314–323. https://doi.org/10.1002/elsc.202000065 
  49. Arbter, P., Sabra, W., Utesch, T., Hong, Y., & Zeng, A. (2021). Metabolomic and kinetic investigations on the electricity‐aided production of butanol by Clostridium pasteurianum strains. Engineering in Life Sciences, 21(3–4), 181–195. https://doi.org/10.1002/elsc.202000035 
  50. Zhang, H., Li, Y., Nie, J., Ren, J., & Zeng, A.-P. (2020). Structure-based dynamic analysis of the glycine cleavage system suggests key residues for control of a key reaction step. Communications Biology, 3(1), 756. https://doi.org/10.1038/s42003-020-01401-6 
  51. Schellenberger, S., Shi, K., Steigleder, T., Malessa, A., Michler, F., Hameyer, L., Neumann, N., Lurz, F., Weigel, R., Ostgathe, C., & Koelpin, A. (2020). A dataset of clinically recorded radar vital signs with synchronised reference sensor signals. Scientific Data, 7(1), 291. https://doi.org/10.1038/s41597-020-00629-5 
  52. Würger, T., Feiler, C., Vonbun-Feldbauer, G. B., Zheludkevich, M. L., & Meißner, R. H. (2020). A first-principles analysis of the charge transfer in magnesium corrosion. Scientific Reports, 10(1), 15006. https://doi.org/10.1038/s41598-020-71694-4 
  53. Suleiman, M., Krüger, A., & Antranikian, G. (2020). Biomass-degrading glycoside hydrolases of archaeal origin. Biotechnology for Biofuels, 13(1), 153. https://doi.org/10.1186/s13068-020-01792-y
 

2020

  1. Abis, M., Bruno, M., Kuchta, K., Simon, F.-G., Grönholm, R., Hoppe, M., & Fiore, S. (2020). Assessment of the Synergy between Recycling and Thermal Treatments in Municipal Solid Waste Management in Europe. Energies, 13(23), 6412. https://doi.org/10.3390/en13236412 
  2. Alassali, A., Aboud, N., Kuchta, K., Jaeger, P., & Zeinolebadi, A. (2020). Assessment of Supercritical CO2 Extraction as a Method for Plastic Waste Decontamination. Polymers, 12(6), 1347. https://doi.org/10.3390/polym12061347 
  3. Alassali, A., Calmano, W., Gidarakos, E., & Kuchta, K. (2020). The degree and source of plastic recyclates contamination with polycyclic aromatic hydrocarbons. RSC Advances, 10(73), 44989–44996. https://doi.org/10.1039/D0RA08554E 
  4. Arbter, P., Sabra, W., Utesch, T., Hong, Y., & Zeng, A. (2020). Metabolomic and kinetic investigations on the electricity‐aided production of butanol by Clostridium pasteurianum strains. Engineering in Life Sciences, elsc.202000035. https://doi.org/10.1002/elsc.202000035 
  5. Ashraf, M. N., Mahmood, M. H., Sultan, M., Banaeian, N., Usman, M., Ibrahim, S. M., Butt, M. U. B. U., Waseem, M., Ali, I., Shakoor, A., & Khan, Z. M. (2020). Investigation of Input and Output Energy for Wheat Production: A Comprehensive Study for Tehsil Mailsi (Pakistan). Sustainability, 12(17), 6884. https://doi.org/10.3390/su12176884 
  6. Buchspies, B., Kaltschmitt, M., & Junginger, M. (2020). Straw utilization for biofuel production: A consequential assessment of greenhouse gas emissions from bioethanol and biomethane provision with a focus on the time dependency of emissions. GCB Bioenergy, 12(10), 789–805. https://doi.org/10.1111/gcbb.12734 
  7. Chirumamilla, M., Krishnamurthy, G. V., Rout, S. S., Ritter, M., Störmer, M., Petrov, A. Y., & Eich, M. (2020). Thermal stability of tungsten based metamaterial emitter under medium vacuum and inert gas conditions. Scientific Reports, 10(1), 3605. https://doi.org/10.1038/s41598-020-60419-2 
  8. Cinar, S., Cinar, S. O., Wieczorek, N., Sohoo, I., & Kuchta, K. (2021). Integration of Artificial Intelligence into Biogas Plant Operation. Processes, 9(1), 85. https://doi.org/10.3390/pr9010085 
  9. Dillmann, S., Kaushik, S. A., Stumme, J., & Ernst, M. (2020). Characterization and Performance of LbL-Coated Multibore Membranes: Zeta Potential, MWCO, Permeability and Sulfate Rejection. Membranes, 10(12), 412. https://doi.org/10.3390/membranes10120412 
  10. Dostal, L., Grossert, H., Duecker, D. A., Grube, M., Kreuter, D. C., Sandmann, K., Zillmann, B., & Seifried, R. (2020). Predictability of Vibration Loads From Experimental Data by Means of Reduced Vehicle Models and Machine Learning. IEEE Access, 8, 177180–177194. https://doi.org/10.1109/ACCESS.2020.3027499 
  11. Engelmann, C., Johannsen, J., Waluga, T., Fieg, G., Liese, A., & Bubenheim, P. (2020). A Multi-Enzyme Cascade for the Production of High-Value Aromatic Compounds. Catalysts, 10(10), 1216. https://doi.org/10.3390/catal10101216 
  12. Falk, M., Bauch, G., & Nissen, I. (2020). On Channel Codes for Short Underwater Messages. Information, 11(2), 58. https://doi.org/10.3390/info11020058 
  13. Gaafar, M. A., Holtorf, J., Eich, M., & Petrov, A. Yu. (2020). Pulse time reversal and stopping by a refractive index front. APL Photonics, 5(8), 080801. https://doi.org/10.1063/5.0007986 
  14. Gessert, N., Nielsen, M., Shaikh, M., Werner, R., & Schlaefer, A. (2020). Skin lesion classification using ensembles of multi-resolution EfficientNets with meta data. MethodsX, 7, 100864. https://doi.org/10.1016/j.mex.2020.100864 
  15. Griese, F., Latus, S., Schlüter, M., Graeser, M., Lutz, M., Schlaefer, A., & Knopp, T. (2020). In-Vitro MPI-guided IVOCT catheter tracking in real time for motion artifact compensation. PLOS ONE, 15(3), e0230821. https://doi.org/10.1371/journal.pone.0230821 
  16. Hackius, N., & Petersen, M. (2020). Translating High Hopes Into Tangible Benefits: How Incumbents in Supply Chain and Logistics Approach Blockchain. IEEE Access, 8, 34993–35003. https://doi.org/10.1109/ACCESS.2020.2974622 
  17. Hauke, J., Achter, S., & Meyer, M. (2020). Theory Development Via Replicated Simulations and the Added Value of Standards. Journal of Artificial Societies and Social Simulation, 23(1), 12. https://doi.org/10.18564/jasss.4219 
  18. Kashif, M., Niaz, H., Sultan, M., Miyazaki, T., Feng, Y., Usman, M., Shahzad, M. W., Niaz, Y., M. Waqas, M., & Ali, I. (2020). Study on Desiccant and Evaporative Cooling Systems for Livestock Thermal Comfort: Theory and Experiments. Energies, 13(11), 2675. https://doi.org/10.3390/en13112675 
  19. Khan, S. U., Farooqi, I. H., Usman, M., & Basheer, F. (2020). Energy Efficient Rapid Removal of Arsenic in an Electrocoagulation Reactor with Hybrid Fe/Al Electrodes: Process Optimization Using CCD and Kinetic Modeling. Water, 12(10), 2876. https://doi.org/10.3390/w12102876 
  20. Kötter, B., Karsten, J., Körbelin, J., & Fiedler, B. (2020). CFRP Thin-Ply Fibre Metal Laminates: Influences of Ply Thickness and Metal Layers on Open Hole Tension and Compression Properties. Materials, 13(4), 910. https://doi.org/10.3390/ma13040910 
  21. Kröning, K., Krause, B., Pötschke, P., & Fiedler, B. (2020). Nanocomposites with p- and n-Type Conductivity Controlled by Type and Content of Nanotubes in Thermosets for Thermoelectric Applications. Nanomaterials, 10(6), 1144. https://doi.org/10.3390/nano10061144 
  22. Kuhl, J., Ding, A., Ngo, N. T., Braschkat, A., Fiehler, J., & Krause, D. (2020). Design of Personalized Devices—The Tradeoff between Individual Value and Personalization Workload. Applied Sciences, 11(1), 241. https://doi.org/10.3390/app11010241 
  23. Levermann, P., Freiberger, F., Katha, U., Zaun, H., Möller, J., Hass, V. C., Schoop, K. M., Kuballa, J., & Pörtner, R. (2020). NMPC-Based Workflow for Simultaneous Process and Model Development Applied to a Fed-Batch Process for Recombinant C. glutamicum. Processes, 8(10), 1313. https://doi.org/10.3390/pr8101313 
  24. Möller, J., Bhat, K., Guhl, L., Pörtner, R., Jandt, U., & Zeng, A. (2020). Regulation of pyruvate dehydrogenase complex related to lactate switch in CHO cells. Engineering in Life Sciences, elsc.202000037. https://doi.org/10.1002/elsc.202000037 
  25. Noirungsee, N., Hackbusch, S., Viamonte, J., Bubenheim, P., Liese, A., & Müller, R. (2020). Influence of oil, dispersant, and pressure on microbial communities from the Gulf of Mexico. Scientific Reports, 10(1), 7079. https://doi.org/10.1038/s41598-020-63190-6 
  26. Nsair, A., Onen Cinar, S., Alassali, A., Abu Qdais, H., & Kuchta, K. (2020). Operational Parameters of Biogas Plants: A Review and Evaluation Study. Energies, 13(15), 3761. https://doi.org/10.3390/en13153761 
  27. Onen Cinar, S., Chong, Z. K., Kucuker, M. A., Wieczorek, N., Cengiz, U., & Kuchta, K. (2020). Bioplastic Production from Microalgae: A Review. International Journal of Environmental Research and Public Health, 17(11), 3842. https://doi.org/10.3390/ijerph17113842 
  28. Paraskevopoulou, P., Smirnova, I., Athamneh, T., Papastergiou, M., Chriti, D., Mali, G., Čendak, T., Raptopoulos, G., & Gurikov, P. (2020). Polyurea-crosslinked biopolymer aerogel beads. RSC Advances, 10(67), 40843–40852. https://doi.org/10.1039/D0RA07337G 
  29. Pileggi, S. F., Indorf, M., Nagi, A., & Kersten, W. (2020). CoRiMaS—An Ontological Approach to Cooperative Risk Management in Seaports. Sustainability, 12(11), 4767. https://doi.org/10.3390/su12114767 
  30. Raza, H. M. U., Ashraf, H., Shahzad, K., Sultan, M., Miyazaki, T., Usman, M., Shamshiri, R. R., Zhou, Y., & Ahmad, R. (2020). Investigating Applicability of Evaporative Cooling Systems for Thermal Comfort of Poultry Birds in Pakistan. Applied Sciences, 10(13), 4445. https://doi.org/10.3390/app10134445 
  31. Schellenberger, S., Shi, K., Steigleder, T., Malessa, A., Michler, F., Hameyer, L., Neumann, N., Lurz, F., Weigel, R., Ostgathe, C., & Koelpin, A. (2020). A dataset of clinically recorded radar vital signs with synchronised reference sensor signals. Scientific Data, 7(1), 291. https://doi.org/10.1038/s41597-020-00629-5 
  32. Schiller, L., Seibel, A., & Schlattmann, J. (2020). A Gait Pattern Generator for Closed-Loop Position Control of a Soft Walking Robot. Frontiers in Robotics and AI, 7, 87. https://doi.org/10.3389/frobt.2020.00087 
  33. Schlüter, M., Glandorf, L., Gromniak, M., Saathoff, T., & Schlaefer, A. (2020). Concept for Markerless 6D Tracking Employing Volumetric Optical Coherence Tomography. Sensors, 20(9), 2678. https://doi.org/10.3390/s20092678 
  34. Seibel, A., Yıldız, M., & Zorlubaş, B. (2020). A Gecko-Inspired Soft Passive Gripper. Biomimetics, 5(2), 12. https://doi.org/10.3390/biomimetics5020012 
  35. Shabir, F., Sultan, M., Niaz, Y., Usman, M., Ibrahim, S. M., Feng, Y., Naik, B. K., Nasir, A., & Ali, I. (2020). Steady-State Investigation of Carbon-Based Adsorbent–Adsorbate Pairs for Heat Transformation Application. Sustainability, 12(17), 7040. https://doi.org/10.3390/su12177040 
  36. Sohoo, I., Ritzkowski, M., Kuchta, K., & Cinar, S. Ö. (2020). Environmental Sustainability Enhancement of Waste Disposal Sites in Developing Countries through Controlling Greenhouse Gas Emissions. Sustainability, 13(1), 151. https://doi.org/10.3390/su13010151 
  37. Stark, M., Wang, L., Bauch, G., & Wesel, R. D. (2020). Decoding Rate-Compatible 5G-LDPC Codes With Coarse Quantization Using the Information Bottleneck Method. IEEE Open Journal of the Communications Society, 1, 646–660. https://doi.org/10.1109/OJCOMS.2020.2994048 
  38. Stender, M., Hoffmann, N., & Papangelo, A. (2020). The Basin Stability of Bi-Stable Friction-Excited Oscillators. Lubricants, 8(12), 105. https://doi.org/10.3390/lubricants8120105 
  39. Suleiman, M., Krüger, A., & Antranikian, G. (2020). Biomass-degrading glycoside hydrolases of archaeal origin. Biotechnology for Biofuels, 13(1), 153. https://doi.org/10.1186/s13068-020-01792-y
  40. Tadesse, Y. B., & Fröhle, P. (2020). Modelling of Flood Inundation due to Levee Breaches: Sensitivity of Flood Inundation against Breach Process Parameters. Water, 12(12), 3566. https://doi.org/10.3390/w12123566 
  41. Würger, T., Feiler, C., Vonbun-Feldbauer, G. B., Zheludkevich, M. L., & Meißner, R. H. (2020). A first-principles analysis of the charge transfer in magnesium corrosion. Scientific Reports, 10(1), 15006. https://doi.org/10.1038/s41598-020-71694-4 
  42. Yeo, D., Dongo, K., Mertenat, A., Lüssenhop, P., Körner, I., & Zurbrügg, C. (2020). Material Flows and Greenhouse Gas Emissions Reduction Potential of Decentralized Composting in Sub-Saharan Africa: A Case Study in Tiassalé, Côte d’Ivoire. International Journal of Environmental Research and Public Health, 17(19), 7229. https://doi.org/10.3390/ijerph17197229 
  43. Zhang, H., Li, Y., Nie, J., Ren, J., & Zeng, A.-P. (2020). Structure-based dynamic analysis of the glycine cleavage system suggests key residues for control of a key reaction step. Communications Biology, 3(1), 756. https://doi.org/10.1038/s42003-020-01401-6 
  44. Zitscher, T., Neuling, U., Habersetzer, A., & Kaltschmitt, M. (2020). Analysis of the German Industry to Determine the Resource Potential of CO2 Emissions for PtX Applications in 2017 and 2050. Resources, 9(12), 149. https://doi.org/10.3390/resources9120149 

2019

  1. Adami, M., & Seibel, A. (2019). On-Board Pneumatic Pressure Generation Methods for Soft Robotics Applications. Actuators, 8(1), 2. https://doi.org/10.3390/act8010002 
  2. Baltruschat, I. M., Nickisch, H., Grass, M., Knopp, T., & Saalbach, A. (2019). Comparison of Deep Learning Approaches for Multi-Label Chest X-Ray Classification. Scientific Reports, 9(1), 1–10. https://doi.org/10.1038/s41598-019-42294-8 
  3. Chirumamilla, M., Krishnamurthy, G. V., Knopp, K., Krekeler, T., Graf, M., Jalas, D., … Eich, M. (2019). Metamaterial emitter for thermophotovoltaics stable up to 1400 °C. Scientific Reports, 9(1). https://doi.org/10.1038/s41598-019-43640-6 
  4. Chen, M., Chen, L., & Zeng, A.-P. (2019). CRISPR/Cas9-facilitated engineering with growth-coupled and sensor-guided in vivo screening of enzyme variants for a more efficient chorismate pathway in E. coli. Metabolic Engineering Communications, 9, e00094. https://doi.org/10.1016/j.mec.2019.e00094 
  5. Didonna, M., Stender, M., Papangelo, A., Fontanela, F., Ciavarella, M., & Hoffmann, N. (2019). Reconstruction of Governing Equations from Vibration Measurements for Geometrically Nonlinear Systems. Lubricants, 7(8), 64. https://doi.org/10.3390/lubricants7080064 
  6. Doblies, A., Boll, B., & Fiedler, B. (2019). Prediction of Thermal Exposure and Mechanical Behavior of Epoxy Resin Using Artificial Neural Networks and Fourier Transform Infrared Spectroscopy. Polymers, 11(2), 363. https://doi.org/10.3390/polym11020363 
  7. Duecker, D. A., Geist, A. R., Kreuzer, E., & Solowjow, E. (2019). Learning Environmental Field Exploration with Computationally Constrained Underwater Robots: Gaussian Processes Meet Stochastic Optimal Control. Sensors, 19(9), 2094. https://doi.org/10.3390/s19092094 
  8. Erichsen, G., Zimmermann, T., & Kather, A. (2019). Effect of Different Interval Lengths in a Rolling Horizon MILP Unit Commitment with Non-Linear Control Model for a Small Energy System. Energies, 12(6), 1003. https://doi.org/10.3390/en12061003 
  9. Gnegel, S., Li, J., Mameka, N., Huber, N., & Düster, A. (2019). Numerical Investigation of Polymer Coated Nanoporous Gold. Materials, 12(13), 2178. https://doi.org/10.3390/ma12132178 
  10. Kluth, T., Szwargulski, P., & Knopp, T. (2019). Towards accurate modeling of the multidimensional magnetic particle imaging physics. New Journal of Physics, 21(10), 103032. https://doi.org/10.1088/1367-2630/ab4938 
  11. Müller, S. (2019). Flexible heuristic algorithm for automatic molecule fragmentation: Application to the UNIFAC group contribution model. Journal of Cheminformatics, 11(1). https://doi.org/10.1186/s13321-019-0382-3 
  12. Nguyen, A. M., & Seibel, A. (2019). Recycling-Oriented Design in Soft Robotics. Actuators, 8(3), 62. https://doi.org/10.3390/act8030062 
  13. Plunkett, A., Kröning, K., & Fiedler, B. (2019). Highly Optimized Nitrogen-Doped MWCNTs through In-Depth Parametric Study Using Design of Experiments. Nanomaterials, 9(4), 643. https://doi.org/10.3390/nano9040643 
  14. Rathjens, M., & Fieg, G. (2019). Cost-Optimal Heat Exchanger Network Synthesis Based on a Flexible Cost Functions Framework. Energies, 12(5), 784. https://doi.org/10.3390/en12050784 
  15. Saeed, M. A., & Kersten, W. (2019). Drivers of Sustainable Supply Chain Management: Identification and Classification. Sustainability, 11(4), 1137. https://doi.org/10.3390/su11041137 
  16. Schiller, L., Seibel, A., & Schlattmann, J. (2019). Toward a Gecko-Inspired, Climbing Soft Robot. Frontiers in Neurorobotics, 13, 106. https://doi.org/10.3389/fnbot.2019.00106 
  17. Schulz, S. (2019). On Using Inertial Measurement Units for Solving the Direct Kinematics Problem of Parallel Mechanisms. Robotics, 8(4), 99. https://doi.org/10.3390/robotics8040099 
  18. Schulz, S. (2019). Performance Evaluation of a Sensor Concept for Solving the Direct Kinematics Problem of General Planar 3-RPR Parallel Mechanisms by Using Solely the Linear Actuators’ Orientations. Robotics, 8(3), 72. https://doi.org/10.3390/robotics8030072 
  19. Shah, S. A. A., Stark, M., & Bauch, G. (2019). Coarsely Quantized Decoding and Construction of Polar Codes Using the Information Bottleneck Method. Algorithms, 12(9), 192. https://doi.org/10.3390/a12090192 
  20. Shang, G., Furlan, K. P., Zierold, R., Blick, R. H., Janßen, R., Petrov, A., & Eich, M. (2019). Transparency induced in opals via nanometer thick conformal coating. Scientific Reports, 9(1), 1–7. https://doi.org/10.1038/s41598-019-47963-2 
  21. Skorych, V., Das, N., Dosta, M., Kumar, J., & Heinrich, S. (2019). Application of Transformation Matrices to the Solution of Population Balance Equations. Processes, 7(8), 535. https://doi.org/10.3390/pr7080535 
  22. Timmerberg, S., Sanna, A., Kaltschmitt, M., & Finkbeiner, M. (2019). Renewable electricity targets in selected MENA countries – Assessment of available resources, generation costs and GHG emissions. Energy Reports, 5, 1470–1487. https://doi.org/10.1016/j.egyr.2019.10.003 

2018

  1. Fohrmann, L. S., Pitruzzello, G., Petrov, A. Y., & Eich, M. (2018). Coupling between multimode fibers and slab waveguides. Optics Express, 26(23), 30255–30266. https://doi.org/10.1364/OE.26.030255 
  2. Hoffmann, J., Schulz, K. M., Pitruzzello, G., Fohrmann, L. S., Petrov, A. Y., & Eich, M. (2018). Backscattering design for a focusing grating coupler with fully etched slots for transverse magnetic modes. Scientific Reports, 8(1), 17746. https://doi.org/10.1038/s41598-018-36082-z 
  3. Jalas, D., Schulz, K. M., Petrov, A. Y., & Eich, M. (2018). Emission enhancement in dielectric nanocomposites. Optics Express, 26(13), 16352–16364. https://doi.org/10.1364/OE.26.016352 
  4. Jia, Y., & Fiedler, B. (2018). Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites. Fibers, 6(3), 59. https://doi.org/10.3390/fib6030059 
  5. Kauer, F., & Turau, V. (2018). An analytical model for wireless mesh networks with collision-free TDMA and finite queues. EURASIP Journal on Wireless Communications and Networking, 2018(1), 149. https://doi.org/10.1186/s13638-018-1146-x 
  6. Klingert, F. M. A., & Meyer, M. (2018). Comparing Prediction Market Mechanisms: An Experiment-Based and Micro Validated Multi-Agent Simulation. Journal of Artificial Societies and Social Simulation, 21(1), 7. https://doi.org/10.18564/jasss.3577 
  7. Krull, A., Morlock, M. M., & Bishop, N. E. (2018). Maximizing the fixation strength of modular components by impaction without tissue damage. Bone & Joint Research, 7(2), 196–204. https://doi.org/10.1302/2046-3758.72.BJR-2017-0078.R2 
  8. Leopold, C., Harder, S., Philipkowski, T., Liebig, W. V., & Fiedler, B. (2018). Comparison of Analytical Approaches Predicting the Compressive Strength of Fibre Reinforced Polymers. Materials, 11(12), 2517. https://doi.org/10.3390/ma11122517 
  9. Lewandowsky, J., & Bauch, G. (2018). Information-Optimum LDPC Decoders Based on the Information Bottleneck Method. IEEE Access, 6, 4054–4071. https://doi.org/10.1109/ACCESS.2018.2797694 
  10. Maiwald, L., Lang, S., Jalas, D., Renner, H., Petrov, A. Y., & Eich, M. (2018). Ewald sphere construction for structural colors. Optics Express, 26(9), 11352–11365. https://doi.org/10.1364/OE.26.011352 
  11. Meeuw, H., Wisniewski, V. K., & Fiedler, B. (2018). Frequency or Amplitude?—Rheo-Electrical Characterization of Carbon Nanoparticle Filled Epoxy Systems. Polymers, 10(9), 999. https://doi.org/10.3390/polym10090999 
  12. Mora-Villalobos, J.-A., & Zeng, A.-P. (2018). Synthetic pathways and processes for effective production of 5-hydroxytryptophan and serotonin from glucose in Escherichia coli. Journal of Biological Engineering, 12, 3. https://doi.org/10.1186/s13036-018-0094-7 
  13. Preibisch, I., Niemeyer, P., Yusufoglu, Y., Gurikov, P., Milow, B., & Smirnova, I. (2018). Polysaccharide-Based Aerogel Bead Production via Jet Cutting Method. Materials, 11(8), 1287. https://doi.org/10.3390/ma11081287 
  14. Ramaswami, S., Behrendt, J., & Otterpohl, R. (2018). Comparison of NF-RO and RO-NF for the Treatment of Mature Landfill Leachates: A Guide for Landfill Operators. Membranes, 8(2), 17. https://doi.org/10.3390/membranes8020017 
  15. Schulz, K. M., Jalas, D., Petrov, A. Y., & Eich, M. (2018). Reciprocity approach for calculating the Purcell effect for emission into an open optical system. Optics Express, 26(15), 19247–19258. https://doi.org/10.1364/OE.26.019247 
  16. Seibel, A., & Schiller, L. (2018). Systematic engineering design helps creating new soft machines. Robotics and Biomimetics, 5(1), 5. https://doi.org/10.1186/s40638-018-0088-4 
  17. Seibel, A., Schulz, S., & Schlattmann, J. (2018). On the Direct Kinematics Problem of Parallel Mechanisms. https://doi.org/10.1155/2018/2412608 
  18. Shang, G., Maiwald, L., Renner, H., Jalas, D., Dosta, M., Heinrich, S., … Eich, M. (2018). Photonic glass for high contrast structural color. Scientific Reports, 8(1). https://doi.org/10.1038/s41598-018-26119-8 
  19. Stark, M., Lewandowsky, J., & Bauch, G. (2018). Information-Bottleneck Decoding of High-Rate Irregular LDPC Codes for Optical Communication Using Message Alignment. Applied Sciences, 8(10), 1884. https://doi.org/10.3390/app8101884 

2017

  1. Aßmann, M., Mügge, C., Gaßmeyer, S. K., Enoki, J., Hilterhaus, L., Kourist, R., & Kara, S. (2017). Improvement of the Process Stability of Arylmalonate Decarboxylase by Immobilization for Biocatalytic Profen Synthesis. Frontiers in Microbiology, 8(448). https://doi.org/10.3389/fmicb.2017.00448 
  2. Augustin, T., Grunert, D., Langner, H. H., Haverkamp, V., & Fiedler, B. (2017). Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink. Advanced Manufacturing: Polymer & Composites Science, 1–10. https://doi.org/10.1080/20550340.2017.1362508 
  3. Brumm, J.-C., & Bauch, G. (2017). On the Placement of On-Body Antennas for Ultra Wideband Capsule Endoscopy. IEEE Access, 5, 10141–10149. https://doi.org/10.1109/ACCESS.2017.2706300 (Durch die tub. zu 100% finanziert, nicht über die DFG!)
  4. Buchspies, B., Thormann, L., Mbohwa, C., & Kaltschmitt, M. (2017). PGE Production in Southern Africa, Part II: Environmental Aspects. Minerals, 7(11), 225. https://doi.org/10.3390/min7110225 
  5. Duecker, D.-A., Geist, A. R., Hengeler, M., Kreuzer, E., Pick, M.-A., Rausch, V., & Solowjow, E. (2017). Embedded Spherical Localization for Micro Underwater Vehicles Based on Attenuation of Electro-Magnetic Carrier Signals. Sensors, 17(5), 959. https://doi.org/10.3390/s17050959 
  6. Fohrmann, L. S., Sommer, G., Pitruzzello, G., Krauss, T. F., Petrov, A. Y., & Eich, M. (2017). Integrating cell on chip—Novel waveguide platform employing ultra-long optical paths. APL Photonics, 2(9), 096102. https://doi.org/10.1063/1.5001486 
  7. Groeger, C., Wang, W., Sabra, W., Utesch, T., & Zeng, A.-P. (2017). Metabolic and proteomic analyses of product selectivity and redox regulation in Clostridium pasteurianum grown on glycerol under varied iron availability. Microbial Cell Factories, 16(64). https://doi.org/10.1186/s12934-017-0678-9 
  8. Hauke, J., Lorscheid, I., & Meyer, M. (2017). Recent Development of Social Simulation as Reflected in JASSS Between 2008 and 2014: A Citation and Co-Citation Analysis. Journal of Artificial Societies and Social Simulation, 20(1), 5. https://doi.org/10.18564/jasss.3238 
  9. Hellmers, S., & Fröhle, P. (2017). Integrating Local Scale Drainage Measures in Meso Scale Catchment Modelling. Water, 9(2), 71. https://doi.org/10.3390/w9020071 
  10. Hezaveh, S., Zeng, A.-P., & Jandt, U. (2017). Investigation of Core Structure and Stability of Human Pyruvate Dehydrogenase Complex: A Coarse-Grained Approach. ACS Omega, 2(3), 1134–1145. https://doi.org/10.1021/acsomega.6b00386 
  11. Husser, E., & Bargmann, S. (2017). The Role of Geometrically Necessary Dislocations in Cantilever Beam Bending Experiments of Single Crystals. Materials, 10(3), 289. https://doi.org/10.3390/ma10030289 
  12. Jalas, D., Shao, L.-H., Canchi, R., Okuma, T., Lang, S., Petrov, A., & Eich, M. (2017). Electrochemical tuning of the optical properties of nanoporous gold. Scientific Reports, 7, 44139. https://doi.org/10.1038/srep44139 
  13. Lang, S., Sharma, G., Molesky, S., Kränzien, P. U., Jalas, T., Jacob, Z., … Eich, M. (2017). Dynamic measurement of near-field radiative heat transfer. Scientific Reports, 7(1), 13916. https://doi.org/10.1038/s41598-017-14242-x 
  14. Leopold, C., Schütt, M., Liebig, W., Philipkowski, T., Kürten, J., Schulte, K., & Fiedler, B. (2017). Compression Fracture of CFRP Laminates Containing Stress Intensifications. Materials, 10(9), 1039. https://doi.org/10.3390/ma10091039 
  15. Sabra, W., Bommareddy, R. R., Maheshwari, G., Papanikolaou, S., & Zeng, A.-P. (2017). Substrates and oxygen dependent citric acid production by Yarrowia lipolytica: insights through transcriptome and fluxome analyses. Microbial Cell Factories, 16(78). https://doi.org/10.1186/s12934-017-0690-0 
  16. Schäfers, C., Blank, S., Wiebusch, S., Elleuche, S., & Antranikian, G. (2017). Complete genome sequence of Thermus brockianus GE-1 reveals key enzymes of xylan/xylose metabolism. Standards in Genomic Sciences, 12, 22. https://doi.org/10.1186/s40793-017-0225-7 
  17. Song, L., & Zeng, A.-P. (2017). Engineering ‘cell robots’ for parallel and highly sensitive screening of biomolecules under in vivo conditions. Scientific Reports, 7(1), 15145. https://doi.org/10.1038/s41598-017-15621-0 
  18. Thormann, L., Buchspies, B., Mbohwa, C., & Kaltschmitt, M. (2017). PGE Production in Southern Africa, Part I: Production and Market Trends. Minerals, 7(11), 224. https://doi.org/10.3390/min7110224 

2016

  1. Barshakh, I., & Elleuche, S. (2016). Is it possible to optimize the protein production yield by the generation of homomultimeric fusion enzymes? SpringerPlus, 5(1), 316. https://doi.org/10.1186/s40064-016-1968-0 
  2. Lipka, T., Moldenhauer, L., Müller, J., & Trieu, H. K. (2016). Photonic integrated circuit components based on amorphous silicon-on-insulator technology. Photonics Research, 4(3), 126. https://doi.org/10.1364/PRJ.4.000126 
  3. Rohrdantz, B., Kuhlmann, K., Stark, A., Geise, A., & Jacob, A. F. (2016). Digital beamforming antenna array with polarisation multiplexing for mobile high-speed satellite terminals at Ka-band. The Journal of Engineering, (February). https://doi.org/10.1049/joe.2015.0163 
  4. Sáinz Bernat, N., Schulte, F., Voß, S., & Böse, J. (2016). Empty Container Management at Ports Considering Pollution, Repair Options, and Street-Turns. Mathematical Problems in Engineering, 2016, 1–13. https://doi.org/10.1155/2016/3847163

2015

  1. Dhas, P. G. T. N., Gulyas, H., & Otterpohl, R. (2015). Impact of Powdered Activated Carbon and Anion Exchange Resin on Photocatalytic Treatment of Textile Wastewater. Journal of Environmental Protection, 06(03), 191–203. https://doi.org/10.4236/jep.2015.63020 
  2. Dyachenko, P. N., Rosário, J. J. do, Leib, E. W., Petrov, A. Y., Störmer, M., Weller, H., … Eich, M. (2015). Tungsten band edge absorber/emitter based on a monolayer of ceramic microspheres. Optics Express, 23(19), A1236–A1244. https://doi.org/10.1364/OE.23.0A1236 
  3. Fohrmann, L. S., Petrov, A. Y., Lang, S., Jalas, D., Krauss, T. F., & Eich, M. (2015). Single mode thermal emission. Optics Express, 23(21), 27672. https://doi.org/10.1364/OE.23.027672 
  4. Gaffron, P., & Niemeier, D. (2015). School Locations and Traffic Emissions — Environmental (In)Justice Findings Using a New Screening Method. International Journal of Environmental Research and Public Health, 12(2), 2009–2025. https://doi.org/10.3390/ijerph120202009 
  5. Gerstein, G., Klusemann, B., Bargmann, S., & Schaper, M. (2015). Characterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple Shear. Materials, 8(1), 285–301. https://doi.org/10.3390/ma8010285 
  6. Gomes, D. R., Hallmann, S., Daniel, C., Fredel, M. C., & Janssen, R. (2015). Surface morphology and fracture strength analysis of nanosecond ablated alumina. Journal of the Ceramic Society of Japan, 123(1435), 160–166. https://doi.org/10.2109/jcersj2.123.160 
  7. Lipka, T., Moldenhauer, L., Müller, J., & Trieu, H. K. (2015). Athermal and wavelength-trimmable photonic filters based on TiO2-cladded amorphous-SOI. Optics Express, 23(15), 20075–20088. https://doi.org/10.1364/OE.23.020075 
  8. Lipka, T., Moldenhauer, L., Müller, J., & Trieu, H. K. (2015). Energy-Efficient Wavelength Multiplexers Based on Hydrogenated Amorphous Silicon Resonators. IEEE Photonics Journal, 7(5), 6600211. https://doi.org/10.1109/JPHOT.2015.2487139 
  9. Neddersen, M., & Elleuche, S. (2015). Fast and reliable production, purification and characterization of heat-stable, bifunctional enzyme chimeras. AMB Express, 5(1), 33. https://doi.org/10.1186/s13568-015-0122-7 
  10. Schröder, C., Blank, S., & Antranikian, G. (2015). First glycoside hydrolase family 2 enzymes from Thermus antranikianii and Thermus brockianus with β-glucosidase activity. Frontiers in Bioengineering and Biotechnology, 3, 76. https://doi.org/10.3389/fbioe.2015.00076 
  11. Schulz, K. M., Prorok, S., Jalas, D., Marder, S. R., Luo, J., Jen, A. K.-Y., … Eich, M. (2015). Mechanism that governs the electro-optic response of second-order nonlinear polymers on silicon substrates. Optical Materials Express, 5(8), 1653–1660. https://doi.org/10.1364/OME.5.001653 
  12. Seibel, A., & Schlattmann, J. (2015). An Analytical Approach to Evaluating Nonmonotonic Functions of Fuzzy Numbers. Advances in Fuzzy Systems, 2015, e898651. https://doi.org/10.1155/2015/898651 
  13. Witt, F., Gührs, J., Morlock, M. M., & Bishop, N. E. (2015). Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses. PLoS ONE, 10(8), e0135517. https://doi.org/10.1371/journal.pone.0135517 
  14. Wycisk, E., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2015). Fatigue performance of laser additive manufactured Ti-6Al-4V in very high cycle fatigue (VHCF) regime up to 109 cycles. Frontiers in Materials : Structural Materials, 2(72). https://doi.org/10.3389/fmats.2015.00072

2014

  1. Basner, A., & Antranikian, G. (2014). Isolation and Biochemical Characterization of a Glucose Dehydrogenase from a Hay Infusion Metagenome. PLoS ONE, 9(1), e85844. https://doi.org/10.1371/journal.pone.0085844 
  2. Gulyas, H., Zhang, S., & Otterpohl, R. (2014). Pretreating Stored Human Urine for Solar Evaporation by Low-Technology Ammonia Stripping. Journal of Environmental Protection, 05(11), 962–969. https://doi.org/10.4236/jep.2014.511097 
  3. Lipka, T., Kiepsch, M., Trieu, H. K., & Müller, J. (2014). Hydrogenated amorphous silicon photonic device trimming by UV-irradiation. Optics Express, 22(10), 12122–12132. https://doi.org/10.1364/OE.22.012122 
  4. Liriano-Jorge, C. F., Sohmen, U., Özkan, A., Gulyas, H., & Otterpohl, R. (2014). TiO2 Photocatalyst Nanoparticle Separation: Flocculation in Different Matrices and Use of Powdered Activated Carbon as a Precoat in Low-Cost Fabric Filtration. Advances in Materials Science and Engineering, 2014, Article ID 602495. https://doi.org/10.1155/2014/602495 
  5. Malsch, T., & Rebenstorf, H. (2014). A Tale of Three Cities – Urban Culture and Social Change in the Palestinian West Bank. Open Journal of Social Science Research, 2(1), 1–16. https://doi.org/10.15480/882.1645  (Früher unter doi.org/10.12966/ojssr.03.01.2014)
  6. Schedler, M., Hiessl, R., Juárez, A. G. V., Gust, G., & Müller, R. (2014). Effect of high pressure on hydrocarbon-degrading bacteria. AMB Express, 4(1), 77. https://doi.org/10.1186/s13568-014-0077-0 
  7. Scheffler, A., Roth, T., & Ahlf, W. (2014). Sustainable decision making under uncertainty: a case study in dredged material management. Environmental Sciences Europe, 26(1), 1–12. https://doi.org/10.1186/2190-4715-26-7 
  8. Seibel, A., & Schlattmann, J. (2014). An Extended Analytical Approach to Evaluating Monotonic Functions of Fuzzy Numbers. Advances in Fuzzy Systems, 2014, 1–9. https://doi.org/10.1155/2014/892363 
  9. Sudhakar, P., Reck, M., Wang, W., He, F. Q., Dobler, I. W., & Zeng, A.-P. (2014). Construction and verification of the transcriptional regulatory response network of Streptococcus mutans upon treatment with the biofilm inhibitor carolacton. BMC Genomics, 15(1), 362. https://doi.org/10.1186/1471-2164-15-362 
  10. Ulchenko, E. A., Jalas, D., Petrov, A. Y., Muñoz, M. C., Lang, S., & Eich, M. (2014). Pulse compression and broadening by reflection from a moving front of a photonic crystal. Optics Express, 22(11), 13280. https://doi.org/10.1364/OE.22.013280

2013

  1. Dietz, D., Sabra, W., & Zeng, A.-P. (2013). Co-cultivation of Lactobacillus zeae and Veillonella cricetifor the production of propionic acid. AMB Express, 3(1), 29. https://doi.org/10.1186/2191-0855-3-29 
  2. Gulyas, H., Jorge, C. F. L., Reich, M., & Otterpohl, R. (2013). Reclaiming Biologically Pretreated Greywater for Reuse by Photocatalytic Oxidation: Qualitative Study on the Removal of Trace Organics. Journal of Water Resource and Protection, 05(06), 568–584. https://doi.org/10.4236/jwarp.2013.56058 
  3. Marcinczak, J. M., & Grigat, R.-R. (2013). Closed Contour Specular Reflection Segmentation in Laparoscopic Images. International Journal of Biomedical Imaging, 2013. https://doi.org/10.1155/2013/593183 

 

Nach oben scrollen