Home » Publishing » Open Access » Financing Open Access » Publishing Fund » Articles funded by TUHH Open Access Fund

Articles funded by TUHH Open Access Fund

APCs financed by Hamburg University of Technology: OpenAPC

The following publications were funded by the TUHH Open Access Publication Fund as well as the DFG programs “Open Access Publication Fees 2022–2024” and “Open Access Publication Fees 2026–2027“:

2026

  1. Chirumamilla, M., Krishnamurthy, G. V., Häntsch, Y., Finsel, M., Shang, G., Rout, S. S., Maiwald, L., Krekeler, T., Ritter, M., Störmer, M., Pedersen, K., Vossmeyer, T., Schneider, G. A., Eich, M., & Petrov, A. Y. (2025). 2D photonic crystal emitter at 1,400°C for thermophotovoltaic energy harvesting. Cell Reports Physical Science, 6(10), 102850. (OA69/2024). https://doi.org/10.1016/j.xcrp.2025.102850
  2. Jannesarahmadi, S., Aminzadeh, M., Hindenlang, B., Zeller-Plumhoff, B., Wilde, F., Mahdaviara, M., Huber, P., & Shokri, N. (2026). Combined Effects of Salt and Microplastics on Evaporation and Crystallization Dynamics in Porous Media. ACS Engineering Au, acsengineeringau.5c00118. (OA68/2025). https://doi.org/10.1021/acsengineeringau.5c00118
  3. Neubacher, M., Touni, F., Yamada, K., Nishikawa, M., & Fiedler, B. (2025). Coelacanth-scale inspired thin-ply composites for load-bearing applications. Composites Part C: Open Access, 18, 100667. (OA44/2025). https://doi.org/10.1016/j.jcomc.2025.100667
  4. Saberi, H., & Saberi, H. (2025). Recycled aggregate concrete confined with FRP under compression: A machine learning-driven framework and parametric analysis. Cleaner Engineering and Technology, 29, 101090. (OA53/2025). https://doi.org/10.1016/j.clet.2025.101090
  5. Schlieker, P. J., Lampe, F., Zwirner, J., Ondruschka, B., Morlock, M. M., & Huber, G. (2025). Design of Surgical Impaction Instruments Matters. Arthroplasty Today, 36, 101898. (OA25/2025). https://doi.org/10.1016/j.artd.2025.101898

2025

  1. Athamneh, T., Abuawad, A., Odat, T., Alshweiat, A., Obaidat, R., Bani Yaseen, F., Al-Najjar, M. A., Garafat, R., Altarabeen, R., Smirnova, I., & Gurikov, P. (2025). Investigation of the Antibacterial Activity of ZnO-Loaded Alginate/Hyaluronic Acid Aerogels for Wound Dressing Applications. Polymers, 17(4), 506. https://doi.org/10.3390/polym17040506
  2. Bornemann, L., Lange, J., & Kaltschmitt, M. (2025). A rigorous optimization method for long-term multi-stage investment planning: Integration of hydrogen into a decentralized multi-energy system. Energy Reports, 13, 117–139. https://doi.org/10.1016/j.egyr.2024.11.079
  3. Heyden, E., Hüttich, P., Bunk, L., & Krause, D. (2025). Vibration reduction of lightweight structures through adjustable damping and stiffness properties at their interfaces. Journal of Low Frequency Noise, Vibration and Active Control, 14613484251317890. https://doi.org/10.1177/14613484251317890
  4. Ihrens, J., Eckert, K. M., Smirnova, I., & Kern, T. A. (2024). Structuring of electrorheological fluids in polymer matrices for miniature actuators. Heliyon, 10(20), e39138. https://doi.org/10.1016/j.heliyon.2024.e39138
  5. Jannesarahmadi, S., Aminzadeh, M., Helmig, R., Or, D., & Shokri, N. (2024). Quantifying Salt Crystallization Impact on Evaporation Dynamics From Porous Surfaces. Geophysical Research Letters, 51(22), e2024GL111080. https://doi.org/10.1029/2024GL111080
  6. Juergensen, N., Weiler, J. R., Knoll, M. T., Gescher, J., & Edel, M. (2025). Strategic improvement of Shewanella oneidensis for biocatalysis: Approach to media refinement and scalable application in a microbial electrochemical system. New Biotechnology, 85, 31–38. https://doi.org/10.1016/j.nbt.2024.11.006
  7. Parsin, S., Scherzinger, M., & Kaltschmitt, M. (2025). Energy-Related Assessment of a Hemicellulose-First Concept—Debottlenecking of a Hydrothermal Wheat Straw Biorefinery. Molecules, 30(3), 602. https://doi.org/10.3390/molecules30030602
  8. Renken, F., Jung, M., Ehlers, S., & Braun, M. (2024). A filter calibration method for laser-scanned weld toe geometries. Applications in Engineering Science, 20, 100200. https://doi.org/10.1016/j.apples.2024.100200
  9. Sadeq, A., Pietsch-Braune, S., & Heinrich, S. (2024). Impact of press channel diameter-to-length ratio on the mechanical properties of biomass pellets during storage. Fuel Processing Technology, 265, 108149. https://doi.org/10.1016/j.fuproc.2024.108149
  10. Schottroff, M., Jaeger, K.-M., Malvis Romero, A., Schneeberger, M., & Liese, A. (2025). From Waste to Value: Extraction of Protease Enzymes from Brewer’s Spent Yeast. Foods, 14(3), 503. https://doi.org/10.3390/foods14030503
  11. Sobirey, E., Schmiech, J., Wegner, M., Flottmann, F., Bechstein, M., Jungnitz, M., Oertel, M., Fiehler, J., & Krause, D. (2025). Model of the Venous System for Training Endovascular Treatment in Interventional Neuroradiology. Anatomia, 4(1), 2. https://doi.org/10.3390/anatomia4010002
  12. Alsuhile, A., Pein, P. S., Barım, Ş. B., Bozbağ, S. E., Smirnova, I., Erkey, C., & Schroeter, B. (2025). Synthesis of Pt Carbon Aerogel Electrocatalysts with Multiscale Porosity Derived from Cellulose and Chitosan Biopolymer Aerogels via Supercritical Deposition for Hydrogen Evolution Reaction. Advanced Energy and Sustainability Research, 6(8), 2400433. https://doi.org/10.1002/aesr.202400433
  13. Arienzo, M., Grinko, D., Kliesch, M., & Heinrich, M. (2025). Bosonic Randomized Benchmarking with Passive Transformations. PRX Quantum, 6(2), 020305. https://doi.org/10.1103/PRXQuantum.6.020305
  14. Asami, K., Roth, S., Hünting, J., Röver, T., & Emmelmann, C. (2025). Metallic Bipolar Plate Production Through Additive Manufacturing: Contrasting MEX/M and PBF-LB/M Approaches. Journal of Experimental and Theoretical Analyses, 3(2), 12. https://doi.org/10.3390/jeta3020012
  15. Beck, K., Esquillor, J., Zarei, M. M., Froes, I., Hauswald, I., Giannakopoulou, A., & Flämig, H. (2025). Making last mile logistics models aware of customer choices, demand sustainability and data economy. European Transport Research Review, 17(1), 29. https://doi.org/10.1186/s12544-024-00683-9
  16. Boettcher, J. M., Sellenschloh, K., Huber, G., Ondruschka, B., & Morlock, M. M. (2025). A Modified Wagner Stem Design Increases the Primary Stability in Cementless Revision Hip Arthroplasty. Arthroplasty Today, 32, 101622. https://doi.org/10.1016/j.artd.2025.101622
  17. Gail, J., Kruse, F., Gu-Stoppel, S., Schmedemann, O., Leder, G., Reinert, W., Wysocki, L., Burmeister, N., Ratzmann, L., Giese, T., Schütt, P., Piechotta, G., & Schüppstuhl, T. (2025). Advancements in Aircraft Engine Inspection: A MEMS-Based 3D Measuring Borescope. Aerospace, 12(5), 419. https://doi.org/10.3390/aerospace12050419
  18. Hofmann, S., Rautenbach, R., Buntkiel, L., Brouwers, I. S., Gaugler, L., Barczyk, J., Fitschen, J., Reinecke, S., Hoffmann, M., Takors, R., Hampel, U., & Schlüter, M. (2025). Lagrangian Sensor Particles for detecting hydrodynamic heterogeneities in industrial bioreactors: Experimental analysis and Lattice-Boltzmann simulations. Chemical Engineering Journal Advances, 22, 100744. https://doi.org/10.1016/j.ceja.2025.100744
  19. Hüttich, P., Heyden, E., & Krause, D. (2025). Experimental Investigation of the Vibration Behaviour of Variant GFRP Sandwich Panels in Thermal Environment. Polymer Testing, 145, 108764. https://doi.org/10.1016/j.polymertesting.2025.108764
  20. Kuelper, N., Jeyaraj, A. K., Liscouët-Hanke, S., & Thielecke, F. (2025). Integration of a model-based systems engineering framework with safety assessment for early design phases: A case study for hydrogen-based aircraft fuel system architecting. Results in Engineering, 25, 104249. https://doi.org/10.1016/j.rineng.2025.104249
  21. Mieling, R., Neidhardt, M., Behrendt, F., Latus, S., Heinemann, A., Ondruschka, B., & Schlaefer, A. (2025). A-scan sequence transformers for palpation with optical coherence elastography. Biomedical Optics Express, 16(5), 1925. https://doi.org/10.1364/BOE.553849
  22. Sayoga, G. V., Bueschler, V. S., Beisch, H., Fiedler, B., Ohde, D., & Liese, A. (2025). Integration of the All-in-One electrode in an electrochemical flow cell for in situ hydrogen peroxide supply in hydroxylation mediated by immobilized unspecific peroxygenase. Electrochemistry Communications, 177, 107949. https://doi.org/10.1016/j.elecom.2025.107949
  23. Schulthoff, M., Anstett, P., Lange, J., Arend, D., Gencer, E., & Kaltschmitt, M. (2025). Federal Transformation costs of e-mobility in Germany: Effectiveness and efficiency of EV incentives between 2015 and 2023. Transportation Research Interdisciplinary Perspectives, 31, 101435. https://doi.org/10.1016/j.trip.2025.101435
  24. Song, S., Ehlers, S., Braun, M., Von Bock Und Polach, F., & Prabowo, A. R. (2025). “3Co principle” for fidelity assessment for bulb flat models in ship structural analysis. Results in Engineering, 25, 103779. https://doi.org/10.1016/j.rineng.2024.103779
  25. Akbarzadeh, R., Ernst, M., Meißner, R., & Fiedler, B. (2025). Capacitive deionisation for water desalination review: Experimental and simulation. Science and Technology of Advanced Materials, 26(1), 2546286. https://doi.org/10.1080/14686996.2025.2546286
  26. Athamneh, T., Al-Najjar, M. A. A., Garafat, R., Abuawad, A. M., Alshweiat, A., Barakat, M., Abu-Irmaileh, W. F., Hamdan, A. M., Odat, T. A., Altarabeen, R., Younes, Y. B., & Smirnova, I. (2025). Preparation and Characterization of Copper-Crosslinked Alginate–Hyaluronic Acid Aerogels as Potential Wound Dressing Materials with Enhanced Antibacterial Properties. Polymers, 17(17), 2406. https://doi.org/10.3390/polym17172406
  27. Drummer, J., Luplow, T., Littner, L., Protz, R., Heimbs, S., Kreutzbruck, M., Gude, M., & Fiedler, B. (2025). Influence of the position of fibre misalignment in glass fibre-reinforced polymers on mechanical properties, damage behaviour and traceability via non-destructive tests. Composites Part C: Open Access, 18, 100633. https://doi.org/10.1016/j.jcomc.2025.100633
  28. Fischer, T., & Huber, N. (2025). Designing microcompression experiments for nanoporous metals via computational plasticity. Materials & Design, 258, 114550. https://doi.org/10.1016/j.matdes.2025.114550
  29. Loft, M., Schwarz, H., & Rung, T. (2025). Data-driven pressure field prediction for ships in regular sea states. Engineering Applications of Computational Fluid Mechanics, 19(1), 2553337. https://doi.org/10.1080/19942060.2025.2553337
  30. Morales Rapallo, A. C., & Kuchta, K. (2025). Recycled Concrete Aggregate in Self-Consolidating Concrete: A Systematic Review and Meta-Analysis of Mechanical Properties, RCA Pre-Treatment and Durability Behaviour. Recycling, 10(6), 214. https://doi.org/10.3390/recycling10060214
  31. Müller, S. (2025). How to crack a SMILES: Automatic crosschecked chemical structure resolution across multiple services using MoleculeResolver. Journal of Cheminformatics, 17(1), 117. https://doi.org/10.1186/s13321-025-01064-7
  32. Steinbrecher, T., Albert, J., & Kaltschmitt, M. (2025). The Nature of Lignin and Implications for Its Technical Use as a Source for Biogenic Aromatics—A Review. Sustainable Chemistry, 6(4), 38. https://doi.org/10.3390/suschem6040038
  33. Walter, M., Gibhardt, D., & Fiedler, B. (2025). Effects of Stoichiometric Variations in L-Arginine-Cured Epoxy Resins. Polymers, 17(22), 3089. https://doi.org/10.3390/polym17223089
  34. Baßler, P., Heinrich, M., & Kliesch, M. (2025). General, Efficient, and Robust Hamiltonian Engineering. PRX Quantum, 6(4), 040346. https://doi.org/10.1103/9yxv-tdqr
  35. Holst, D., Moenck, K., Koch, J., Schmedemann, O., & Schüppstuhl, T. (2025). Transparent Reporting of AI in Systematic Literature Reviews: Development of the PRISMA-trAIce Checklist. JMIR AI, 4, e80247–e80247. https://doi.org/10.2196/80247

2024

  1. Widderich, N., Bubenheim, P., & Liese, A. (2024). Online monitoring of phytate content in plant residuals during wet-treatment. Scientific Reports, 14(1), 612. https://doi.org/10.1038/s41598-023-49950-0
  2. Brandt, J., Dittrich, G., Thelen, M., Renner, H., Huber, P., Eich, M., & Petrov, A. (2024). On the applicability of the Maxwell Garnett effective medium model to media with a high density of cylindrical pores. Optical Materials Express, 14(4), 871. https://doi.org/10.1364/OME.516125
  3. Jiang, Y., & Renner, B.-C. (2024). Low-Cost Underwater Swarm Acoustic Localization: A Review. IEEE Access, 12, 25779–25796. https://doi.org/10.1109/ACCESS.2024.3357359
  4. Röver, T., Fuchs, C., Asami, K., & Emmelmann, C. (2024). Dimensioning of Biomimetic Beams under Bending for Additively Manufactured Structural Components. Biomimetics, 9(4), 214. https://doi.org/10.3390/biomimetics9040214
  5. Schulz, C. W., Netzband, S., Özinan, U., Cheng, P. W., & Abdel-Maksoud, M. (2024). Wind turbine rotors in surge motion: New insights into unsteady aerodynamics of floating offshore wind turbines (FOWTs) from experiments and simulations. Wind Energy Science, 9(3), 665–695. https://doi.org/10.5194/wes-9-665-2024
  6. Eckel, C., Babazadeh, D., & Becker, C. (2024). Classification of Converter-Driven Stability and Suitable Modeling and Analysis Methods. IEEE Access, 12, 53056–53073. https://doi.org/10.1109/ACCESS.2024.3388098
  7. Klost, M., Keil, C., & Gurikov, P. (2024). Dried Porous Biomaterials from Mealworm Protein Gels: Proof of Concept and Impact of Drying Method on Structural Properties and Zinc Retention. Gels, 10(4), 275. https://doi.org/10.3390/gels10040275
  8. Aminzadeh, M., Friedrich, N., Narayanaswamy, S., Madani, K., & Shokri, N. (2024). Evaporation Loss From Small Agricultural Reservoirs in a Warming Climate: An Overlooked Component of Water Accounting. Earth’s Future, 12(1), e2023EF004050. https://doi.org/10.1029/2023EF004050
  9. Drawer, C., Rödl, A., & Kaltschmitt, M. (2024). Life cycle assessment of construction and driving operation of a hydrogen-powered truck built from a used diesel truck. Transportation Research Interdisciplinary Perspectives, 24, 101020. https://doi.org/10.1016/j.trip.2024.101020
  10. Vogelbacher, A., Aminzadeh, M., Madani, K., & Shokri, N. (2024). An Analytical Framework to Investigate Groundwater‐Atmosphere Interactions Influenced by Soil Properties. Water Resources Research, 60(4), e2023WR036643. https://doi.org/10.1029/2023WR036643
  11. Weissmüller, J. (2024). Coherent Phase Change in Interstitial Solutions: A Hierarchy of Instabilities. Advanced Science, 11(21), 2308554. https://doi.org/10.1002/advs.202308554
  12. Brunow, J., Spalek, N., Mohammadi, F., & Rutner, M. (2023). A novel post-weld treatment using nanostructured metallic multilayer for superior fatigue strength. Scientific Reports, 13(1), 22215. https://doi.org/10.1038/s41598-023-49192-0
  13. Gollmer, C., Siegmund, T., Weigel, V., & Kaltschmitt, M. (2024). Comparative Analysis of Primary and Secondary Emission Mitigation Measures for Small-Scale Wood Chip Combustion. Energies, 17(17), 4403. https://doi.org/10.3390/en17174403
  14. Kaushik, S. A., Armbruster, D., Dittmer, J., Bruniecka-Sulewski, D., Wendler, B., & Ernst, M. (2024). Investigation of scaling inhibition and biofouling potential of different molecular weight fractions of a PAA antiscalant. Npj Clean Water, 7(1), 36. https://doi.org/10.1038/s41545-024-00332-7
  15. Mayer, N., Dirauf, M. P., & Kaltschmitt, M. (2023). Microwave-assisted acidic hydrolysis of phytate from rye bran – Experimental procedure and model prediction. LWT, 189, 115499. https://doi.org/10.1016/j.lwt.2023.115499
  16. Quante, G., Voß, S., Bullerdiek, N., Voigt, C., & Kaltschmitt, M. (2024). Hydroprocessing of fossil fuel-based aviation kerosene – Technology options and climate impact mitigation potentials. Atmospheric Environment: X, 22, 100259. https://doi.org/10.1016/j.aeaoa.2024.100259
  17. Shah, T. M., Egwu, C. O., Hammad, M., & Otterpohl, R. (2024). Decision Support Systems Based on a Multiple-Criteria Decision Analysis to Promote a Whole-of-Resource Approach for Water Management, with a Case Study of Rural Bengaluru in India. Water, 16(12), 1674. https://doi.org/10.3390/w16121674
  18. Sikander, A., Deegener, S., & Körner, I. (2024). Decomposition of biodegradable plastic bags for kitchen waste collection in industrial composting. Frontiers in Sustainable Food Systems, 8, 1433460. https://doi.org/10.3389/fsufs.2024.1433460
  19. Walter, M., Neubacher, M., & Fiedler, B. (2024). Using thermokinetic methods to enhance properties of epoxy resins with amino acids as biobased curing agents by achieving full crosslinking. Scientific Reports, 14(1), 4367. https://doi.org/10.1038/s41598-024-54484-0
  20. Wegner, M., Schmiech, J., Sobirey, E., Krause, D., & Gargioni, E. (2024). Requirement analysis in medical phantom development: A survey tool approach with an illustrative example of a multimodal deformable pelvic phantom. Frontiers in Physics, 12, 1416601. https://doi.org/10.3389/fphy.2024.1416601
  21. Witt, M., Patzke, J., Nehlsen, E., & Fröhle, P. (2024). Deriving erosion thresholds of freshly deposited cohesive sediments from the port of Hamburg using a closed microcosm system. Frontiers in Marine Science, 11, 1386081. https://doi.org/10.3389/fmars.2024.1386081
  22. Zitscher, T., & Kaltschmitt, M. (2024). Sustainable Carbon Utilization for a Climate-Neutral Economy–Framework Necessities and Assessment Criteria. Energies, 17(16), 4118. https://doi.org/10.3390/en17164118
  23. Berschik, M. C., Zuefle, M., Laukotka, F. N., & Krause, D. (2024). Product family engineering along the life cycle – research aspects to cope with variability in advanced systems. Design Science, 10, e27. https://doi.org/10.1017/dsj.2024.21
  24. Foerger, F., Boberg, M., Faltinath, J., Knopp, T., & Möddel, M. (2024). Design and Optimization of a Magnetic Field Generator for Magnetic Particle Imaging with Soft Magnetic Materials. Advanced Intelligent Systems, 6(11), 2400017. https://doi.org/10.1002/aisy.202400017
  25. Goeldner, M., & Gehder, S. (2024). Digital Health Applications (DiGAs) on a Fast Track: Insights From a Data-Driven Analysis of Prescribable Digital Therapeutics in Germany From 2020 to Mid-2024. Journal of Medical Internet Research, 26, e59013. https://doi.org/10.2196/59013
  26. Guo, J., Wagner, W., Atamaniuk, I., Chong, Z. K., Alassali, A., & Kuchta, K. (2024). Overlooked Impact of Moisture on the Stability of Printing Ink and Its Impact on Recycled Low-Density Polyethylene (LDPE) Quality. Polymers, 16(23), 3234. https://doi.org/10.3390/polym16233234
  27. Laukotka, F. N., Moenck, K., Schüppstuhl, T., & Krause, D. (2024). Graph-based information management for retrofitting long-living assets. Data-Centric Engineering, 5, e46. https://doi.org/10.1017/dce.2024.49
  28. Nickel, N., Fitschen, J., Haase, I., Kuschel, M., Schulz, T. W., Wucherpfennig, T., & Schlüter, M. (2024). Novel sparging strategies to enhance dissolved carbon dioxide stripping in industrial scale stirred tank reactors. Frontiers in Chemical Engineering, 6, 1470991. https://doi.org/10.3389/fceng.2024.1470991
  29. Sadeghi, M., Abbasimoshaei, A., Kitajima Borges, J. P., & Kern, T. A. (2024). Numerical and Experimental Study of a Wearable Exo-Glove for Telerehabilitation Application Using Shape Memory Alloy Actuators. Actuators, 13(10), 409. https://doi.org/10.3390/act13100409
  30. Schulz, C. W., Netzband, S., Knipper, P. D., & Abdel-Maksoud, M. (2024). Low-uncertainty wave tank testing and validation of numerical methods for floating offshore wind turbines. Wind Energy Science, 9(10), 1941–1965. https://doi.org/10.5194/wes-9-1941-2024
  31. Siegmund, T., Gollmer, C., Horstmann, N., & Kaltschmitt, M. (2024). Carbon monoxide (CO) and particulate matter (PM) emissions during the combustion of wood pellets in a small-scale combustion unit – Influence of aluminum-(silicate-)based fuel additivation. Fuel Processing Technology, 262, 108111. https://doi.org/10.1016/j.fuproc.2024.108111
  32. Ullah, A., Asami, K., Holtz, L., Röver, T., Azher, K., Bartsch, K., & Emmelmann, C. (2024). A Machine Learning Approach for Mechanical Component Design Based on Topology Optimization Considering the Restrictions of Additive Manufacturing. Journal of Manufacturing and Materials Processing, 8(5), 220. https://doi.org/10.3390/jmmp8050220
  33. Eberhard Reiner, J., Korth, B., & Edel, M. (2024). Oxygen In The Mix: Is Oxic Microbial Electrosynthesis A Potential Alternative For Biomass Production? ChemElectroChem, 11(20), e202400397. https://doi.org/10.1002/celc.202400397
  34. Gehder, S., & Goeldner, M. (2025). Unpacking Performance Factors of Innovation Systems and Studying Germany’s Attempt to Foster the Role of the Patient Through a Market Access Pathway for Digital Health Applications (DiGAs): Exploratory Mixed Methods Study. Journal of Medical Internet Research, 27, e66356. https://doi.org/10.2196/66356
  35. Häntsch, Y., Diaz, A., Holler, M., Krekeler, T., Ritter, M., Rosenfeldt, S., Retsch, M., & Furlan, K. P. (2024). Multi-scale structural characterization of ceramic-based photonic glasses for structural colors. Discover Nano, 19(1), 114. https://doi.org/10.1186/s11671-024-04057-x
  36. Reinhold, L., Wasle, C., & Kölpin, A. (2024). A circular switched parasitic array with directors for LoRa applications at 868 MHz. Electronics Letters, 60(13), e13247. https://doi.org/10.1049/ell2.13247

2023

  1. Nevermann, H., Becerra Gomez, J. N., Fröhle, P., & Shokri, N. (2023). Land loss implications of sea level rise along the coastline of Colombia under different climate change scenarios. Climate Risk Management, 39, 100470. https://doi.org/10.1016/j.crm.2022.100470 
  2. Kotobi, A., Schwob, L., Vonbun-Feldbauer, G. B., Rossi, M., Gasparotto, P., Feiler, C., Berden, G., Oomens, J., Oostenrijk, B., Scuderi, D., Bari, S., & Meißner, R. H. (2023). Reconstructing the infrared spectrum of a peptide from representative conformers of the full canonical ensemble. Communications Chemistry, 6(1), 46. https://doi.org/10.1038/s42004-023-00835-3 
  3. Gollmer, C., Weigel, V., & Kaltschmitt, M. (2023). Emission Mitigation by Aluminum-Silicate-Based Fuel Additivation of Wood Chips with Kaolin and Kaolinite. Energies, 16(7), 3095. https://doi.org/10.3390/en16073095 
  4. Guo, J., Luo, C., Wittkowski, C., Fehr, I., Chong, Z., Kitzberger, M., Alassali, A., Zhao, X., Leineweber, R., Feng, Y., & Kuchta, K. (2023). Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging. Polymers, 15(9), 2220. https://doi.org/10.3390/polym15092220 
  5. Laukotka, F. N., & Krause, D. (2023). Supporting Digital Twins for the Retrofit in Aviation by a Model-Driven Data Handling. Systems, 11(3), 142. https://doi.org/10.3390/systems11030142 
  6. Nevermann, H., AghaKouchak, A., & Shokri, N. (2023). Sea level rise implications on future inland migration of coastal wetlands. Global Ecology and Conservation, 43, e02421. https://doi.org/10.1016/j.gecco.2023.e02421 
  7. Schroeter, B., Jeansathawong, P., Hajnal, A., & Gurikov, P. (2023). Wet Milling of Alginate Alco‐ and Hydrogel Composites: A Facile Top‐Down Approach for Continuous Production of Aerogel Microparticles. Macromolecular Materials and Engineering, 2200674. https://doi.org/10.1002/mame.202200674 
  8. Kuchemüller, K. B., Pörtner, R., & Möller, J. (2023). Design of cell expansion processes for adherent‐growing cells with mDoE‐workflow. Engineering in Life Sciences, 23(5), e2200059. https://doi.org/10.1002/elsc.202200059 
  9. Neidhardt, M., Mieling, R., Bengs, M., & Schlaefer, A. (2023). Optical force estimation for interactions between tool and soft tissues. Scientific Reports, 13(1), 506. https://doi.org/10.1038/s41598-022-27036-7 
  10. Shah, T. M., Khan, A. H., Nicholls, C., Sohoo, I., & Otterpohl, R. (2023). Using Landfill Sites and Marginal Lands for Socio-Economically Sustainable Biomass Production through Cultivation of Non-Food Energy Crops: An Analysis Focused on South Asia and Europe. Sustainability, 15(6), 4923. https://doi.org/10.3390/su15064923 
  11. Wollak, B., Espinoza, D., Dippel, A.-C., Sturm, M., Vrljic, F., Gutowski, O., Nielsen, I. G., Sheppard, T. L., Korup, O., & Horn, R. (2023). Catalytic reactor for operando spatially resolved structure–activity profiling using high-energy X-ray diffraction. Journal of Synchrotron Radiation, 30(3), 571–581. https://doi.org/10.1107/S1600577523001613 
  12. Klose, L., Meyer-Heydecke, N., Wongwattanarat, S., Chow, J., Pérez García, P., Carré, C., Streit, W., Antranikian, G., Romero, A. M., & Liese, A. (2023). Towards Sustainable Recycling of Epoxy-Based Polymers: Approaches and Challenges of Epoxy Biodegradation. Polymers, 15(12), 2653. https://doi.org/10.3390/polym15122653
  13. Müller, P. M., Bletsos, G., & Rung, T. (2023). Shape Transformation Approaches for Fluid Dynamic Optimization. Aerospace, 10(6), 519. https://doi.org/10.3390/aerospace10060519
  14. Büsch, L., Koch, J., Schoepflin, D., Schulze, M., & Schüppstuhl, T. (2023). Towards Recognition of Human Actions in Collaborative Tasks with Robots: Extending Action Recognition with Tool Recognition Methods. Sensors, 23(12), 5718. https://doi.org/10.3390/s23125718
  15. Eixenberger, D., Kumar, A., Klinger, S., Scharnagl, N., Dawood, A. W. H., & Liese, A. (2023). Polymer-Grafted 3D-Printed Material for Enzyme Immobilization—Designing a Smart Enzyme Carrier. Catalysts, 13(7), 1130. https://doi.org/10.3390/catal13071130
  16. Erhardt, S., Koch, M., Kiefer, A., Veith, M., Weigel, R., & Koelpin, A. (2023). Mobile-BAT—A Novel Ultra-Low Power Wildlife Tracking System. Sensors, 23(11), 5236. https://doi.org/10.3390/s23115236
  17. Herzog, J., Mook, A., Utesch, T., Bengelsdorf, F. R., & Zeng, A.-P. (2023). Lactate based caproate production with Clostridium drakei and process control of Acetobacterium woodii via lactate dependent in situ electrolysis. Frontiers in Bioengineering and Biotechnology, 11, 1212044. https://doi.org/10.3389/fbioe.2023.1212044
  18. Koch, J., Büchse, C., & Schüppstuhl, T. (2023). Development and Integration of a Workpiece-Based Calibration Method for an Optical Assistance System. Applied Sciences, 13(13), 7369. https://doi.org/10.3390/app13137369
  19. Prünte, P., Schoepflin, D., & Schüppstuhl, T. (2023). A Comparative Study of Visual Identification Methods for Highly Similar Engine Tubes in Aircraft Maintenance, Repair and Overhaul. Sensors, 23(15), 6779. https://doi.org/10.3390/s23156779
  20. Venzke, M., Shudrenko, Y., Youssfi, A., Steffen, T., Turau, V., & Becker, C. (2023). Co-Simulation of a Cellular Energy System. Energies, 16(17), 6150. https://doi.org/10.3390/en16176150
  21. Radtke, L., Bletsos, G., Kühl, N., Suchan, T., Rung, T., Düster, A., & Welker, K. (2023). Parameter-Free Shape Optimization: Various Shape Updates for Engineering Applications. Aerospace, 10(9), 751. https://doi.org/10.3390/aerospace10090751
  22. Hanna, M., Wöller, L.-N., Dambietz, F. M., & Krause, D. (2023). A Model-Based Approach for the Methodical Development and Configuration of Modular Product Families. Systems, 11(9), 449. https://doi.org/10.3390/systems11090449
  23. Abbasimoshaei, A., Chinnakkonda Ravi, A. K., & Kern, T. A. (2023). Development of a New Control System for a Rehabilitation Robot Using Electrical Impedance Tomography and Artificial Intelligence. Biomimetics, 8(5), 420. https://doi.org/10.3390/biomimetics8050420
  24. Malvis Romero, A., Picado Morales, J. J., Klose, L., & Liese, A. (2023). Enzyme-Assisted Extraction of Ulvan from the Green Macroalgae Ulva fenestrata. Molecules, 28(19), 6781. https://doi.org/10.3390/molecules28196781
  25. Rennpferdt, C., Zuefle, M., Bagusat, M., Bender, D., & Krause, D. (2023). Development of Modular Architectures for Product–Service Systems. Sustainability, 15(18), 14001. https://doi.org/10.3390/su151814001
  26. Lohmann, J., Kölzer, T., Schaan, G., & Schmidt‐Döhl, F. (2023). Self‐organizing systems in the construction industry. Engineering Reports, e12692. https://doi.org/10.1002/eng2.12692
  27. Mittelhaus, J., Röttger, P., Schill, E., Jacobs, J., & Fiedler, B. (2023). Investigation of the ductile deformation potential of microscale epoxy materials. Polymer Testing, 128, 108217. https://doi.org/10.1016/j.polymertesting.2023.108217
  28. Sankowski, O., & Krause, D. (2023). The Human-Centredness Metric: Early Assessment of the Quality of Human-Centred Design Activities. Applied Sciences, 13(21), 12090. https://doi.org/10.3390/app132112090
  29. Del Río, J. I., Juhász, L., Kalmár, J., Erdélyi, Z., Bermejo, M. D., Martín, Á., Smirnova, I., Gurikov, P., & Schroeter, B. (2023). A greener approach for synthesizing metal-decorated carbogels from alginate for emerging technologies. Nanoscale Advances, 5(23), 6635–6646. https://doi.org/10.1039/D3NA00444A
  30. Ohde, D., Thomas, B., Bubenheim, P., & Liese, A. (2023). Enzymatic Carboxylation of Resorcinol in Aqueous Triethanolamine at Elevated CO2 Pressure. Molecules, 29(1), 25. https://doi.org/10.3390/molecules29010025
  31. Peralta Abadia, P., Ahmad, M. E., & Smarsly, K. (2023). Printing Information Modeling (PIM) for Additive Manufacturing of Concrete Structures. Applied Sciences, 13(23), 12664. https://doi.org/10.3390/app132312664
  32. Sayoga, G. V., Bueschler, V. S., Beisch, H., Utesch, T., Holtmann, D., Fiedler, B., Ohde, D., & Liese, A. (2023). Electrochemical H2O2—Stat mode as reaction concept to improve the process performance of an unspecific peroxygenase. New Biotechnology, 78, 95–104. https://doi.org/10.1016/j.nbt.2023.10.007
  33. Zimmermann, A., Scherzinger, M., & Kaltschmitt, M. (2023). Process options for the recovery of a pentosan-enriched fraction from wheat-based bioethanol thin stillage. Bioresources and Bioprocessing, 10(1), 59. https://doi.org/10.1186/s40643-023-00679-8

2022

  1. Hellmers, S., & Fröhle, P. (2022). Computation of backwater effects in surface waters of lowland catchments including control structures – an efficient and re-usable method implemented in the hydrological open-source model Kalypso-NA (4.0). Geoscientific Model Development, 15(3), 1061–1077. https://doi.org/10.5194/gmd-15-1061-2022 
  2. Pache, R., & Rung, T. (2022). Data-driven surrogate modeling of aerodynamic forces on the superstructure of container vessels. Engineering Applications of Computational Fluid Mechanics, 16(1), 746–763. https://doi.org/10.1080/19942060.2022.2044383 
  3. Braun, M., Dörner, A., ter Veer, K. F., Willems, T., Seidel, M., Hendrikse, H., Høyland, K. V., Fischer, C., & Ehlers, S. (2022). Development of Combined Load Spectra for Offshore Structures Subjected to Wind, Wave, and Ice Loading. Energies, 15(2), 559. https://doi.org/10.3390/en15020559 
  4. Nagi, A., & Kersten, W. (2022). A Process Model for Cooperative Risk Management in Seaports. Sustainability, 14(3), 1662. https://doi.org/10.3390/su14031662 
  5. Lamp, A., Kaltschmitt, M., & Dethloff, J. (2022). Options to Improve the Mechanical Properties of Protein-Based Materials. Molecules, 27(2), 446. https://doi.org/10.3390/molecules27020446 
  6. Cinar, S. Ö., Cinar, S., & Kuchta, K. (2022). Machine Learning Algorithms for Temperature Management in the Anaerobic Digestion Process. Fermentation, 8(2), 65. https://doi.org/10.3390/fermentation8020065 
  7. Gibhardt, D., Buggisch, C., Meyer, D., & Fiedler, B. (2022). Hygrothermal Aging History of Amine-Epoxy Resins: Effects on Thermo-Mechanical Properties. Frontiers in Materials, 9, 826076. https://doi.org/10.3389/fmats.2022.826076 
  8. Widderich, N., Mayer, N., Ruff, A. J., Reckels, B., Lohkamp, F., Visscher, C., Schwaneberg, U., Kaltschmitt, M., Liese, A., & Bubenheim, P. (2022). Conditioning of Feed Material Prior to Feeding: Approaches for a Sustainable Phosphorus Utilization. Sustainability, 14(7), 3998. https://doi.org/10.3390/su14073998 
  9. Sohoo, I., Ritzkowski, M., Sultan, M., Farooq, M., & Kuchta, K. (2022). Conceptualization of Bioreactor Landfill Approach for Sustainable Waste Management in Karachi, Pakistan. Sustainability, 14(6), 3364. https://doi.org/10.3390/su14063364 
  10. John, D., & Kaltschmitt, M. (2022). Control of a PVT-Heat-Pump-System Based on Reinforcement Learning–Operating Cost Reduction through Flow Rate Variation. Energies, 15(7), 2607. https://doi.org/10.3390/en15072607 
  11. Xu, Y., Ren, J., Wang, W., & Zeng, A. (2022). Improvement of glycine biosynthesis from one‐carbon compounds and ammonia catalyzed by the glycine cleavage system in vitro. Engineering in Life Sciences, 22(1), 40–53. https://doi.org/10.1002/elsc.202100047 
  12. Hong, Y., Nguyen, T., Arbter, P., Utesch, T., & Zeng, A. (2022). Phenotype analysis of cultivation processes via unsupervised machine learning: Demonstration for Clostridium pasteurianum. Engineering in Life Sciences, 22(2), 85–99. https://doi.org/10.1002/elsc.202100114 
  13. Hassani, A., Azapagic, A., & Shokri, N. (2021). Global predictions of primary soil salinization under changing climate in the 21st century. Nature Communications, 12(1), 6663. https://doi.org/10.1038/s41467-021-26907-3 
  14. Böhm, A. M., Herrnring, H., & von Bock und Polach, F. (2022). Data from uniaxial compressive testing of laboratory-made granular ice. Data in Brief, 42, 108236. https://doi.org/10.1016/j.dib.2022.108236 
  15. Lasser, J., Schneider, J., Lösch, T., Röwert, R., Heck, T., Bluemel, C., Neufend, M., Steinhardt, I., & Skupien, S. (2022). MapOSR – A mapping review dataset of empirical studies on Open Science. F1000Research, 11, 535. https://doi.org/10.12688/f1000research.121665.1 
  16. Dymala, T., Wang, S., Jarolin, K., Song, T., Shen, L., Dosta, M., & Heinrich, S. (2022). MP-PIC Simulation of Biomass Steam Gasification Using Ilmenite as an Oxygen Carrier. Atmosphere, 13(7), 1009. https://doi.org/10.3390/atmos13071009 
  17. Cinar, S., Önen Cinar, S., Staudter, C., & Kuchta, K. (2022). Operational Excellence in a Biogas Plant through Integration of Lean Six Sigma Methodology. Designs, 6(4), 61. https://doi.org/10.3390/designs6040061 
  18. Kruber, K. F., & Skiborowski, M. (2022). Topology-Based Initialization for the Optimization-Based Design of Heteroazeotropic Distillation Processes. Processes, 10(8), 1482. https://doi.org/10.3390/pr10081482 
  19. Patzke, J., Nehlsen, E., Fröhle, P., & Hesse, R. F. (2022). Spatial and Temporal Variability of Bed Exchange Characteristics of Fine Sediments From the Weser Estuary. Frontiers in Earth Science, 10, 916056. https://doi.org/10.3389/feart.2022.916056 
  20. Langer, M., Jamal, M. U., Conklin, A., & Ernst, M. (2022). Chromium Removal in the Presence of NOM during Fe(II) Reductive Precipitation for Drinking Water Treatment. Water, 14(18), 2903. https://doi.org/10.3390/w14182903 
  21. Schulz, C. W., Wang, K., Wieczorek, K., Netzband, S., & Abdel‐Maksoud, M. (2022). Experimental and numerical investigation of the yaw moment of a downwind coned wind turbine rotor. Wind Energy, we.2779. https://doi.org/10.1002/we.2779 
  22. Steinbrecher, T., Bonk, F., Scherzinger, M., Lüdtke, O., & Kaltschmitt, M. (2022). Fractionation of Lignocellulosic Fibrous Straw Digestate by Combined Hydrothermal and Enzymatic Treatment. Energies, 15(17), 6111. https://doi.org/10.3390/en15176111 
  23. Wesselhöft, M., Hinckeldeyn, J., & Kreutzfeldt, J. (2022). Controlling Fleets of Autonomous Mobile Robots with Reinforcement Learning: A Brief Survey. Robotics, 11(5), 85. https://doi.org/10.3390/robotics11050085 
  24. Meyer, F., Gasimov, N., Bubenheim, P., & Waluga, T. (2022). Concept of an Enzymatic Reactive Extraction Centrifuge. Processes, 10(10), 2137. https://doi.org/10.3390/pr10102137 
  25. Niehaus, D., Hofmann, S., Kumar, S. B., Hoffmann, M., Cisneros-Aguirre, J., & Schlüter, M. (2022). Experimental Characterisation and Field Experience of a Reusable, Modified Polyurethane Foam for the Mechanical Clean-Up of Oil Spills on the Sea Surface. Journal of Marine Science and Engineering, 10(10), 1369. https://doi.org/10.3390/jmse10101369 
  26. Chan, T. T., Heinrich, S., Grabe, J., & Dosta, M. (2022). Microscale Modeling of Frozen Particle Fluid Systems with a Bonded-Particle Model Method. Materials, 15(23), 8505. https://doi.org/10.3390/ma15238505 
  27. Depta, P. N., Dosta, M., Wenzel, W., Kozlowska, M., & Heinrich, S. (2022). Hierarchical Coarse-Grained Strategy for Macromolecular Self-Assembly: Application to Hepatitis B Virus-Like Particles. International Journal of Molecular Sciences, 23(23), 14699. https://doi.org/10.3390/ijms232314699 
  28. Grube, M., Wieck, J. C., & Seifried, R. (2022). Comparison of Modern Control Methods for Soft Robots. Sensors, 22(23), 9464. https://doi.org/10.3390/s22239464 
  29. Guo, J., Kim, Y., Chong, Z. K., Alassali, A., Chacon, J. P., Gottschalk, D., Kitzberger, M., & Kuchta, K. (2022). Quality Changes of Low-Density Polyethylene (LDPE) Recyclates from the Pretreatment Process with a Cationic Surfactant and a Nonionic Surfactant as Cleaning Agents Upstream of Extrusion. Processes, 10(11), 2174. https://doi.org/10.3390/pr10112174 
  30. Kursula, L., Kexel, F., Fitschen, J., Hoffmann, M., Schlüter, M., & von Kameke, A. (2022). Unsteady Mass Transfer in Bubble Wakes Analyzed by Lagrangian Coherent Structures in a Flat-Bed Reactor. Processes, 10(12), 2686. https://doi.org/10.3390/pr10122686 
  31. Schuster, J., Huber, J., Stumme, J., Grieb, A., & Ernst, M. (2022). Combining real-time fluorescence spectroscopy and flow cytometry to reveal new insights in DOC and cell characterization of drinking water. Frontiers in Environmental Chemistry, 3, 931067. https://doi.org/10.3389/fenvc.2022.931067 

2021

  1. Johannsen, J., Baek, G., Fieg, G., & Waluga, T. (2021). An innovative approach for fatty acid reduction to fatty aldehydes. Green Chemistry Letters and Reviews, 14(3), 455–461. https://doi.org/10.1080/17518253.2021.1943006 
  2. Hein, S. S. V., Sohrt, V., Nehlsen, E., Strotmann, T., & Fröhle, P. (2021). Tidal Oscillation and Resonance in Semi-Closed Estuaries—Empirical Analyses from the Elbe Estuary, North Sea. Water, 13(6), 848. https://doi.org/10.3390/w13060848 
  3. Dreier, N., Nehlsen, E., Fröhle, P., Rechid, D., Bouwer, L., & Pfeifer, S. (2021). Future Changes in Wave Conditions at the German Baltic Sea Coast Based on a Hybrid Approach Using an Ensemble of Regional Climate Change Projections. Water, 13(2), 167. https://doi.org/10.3390/w13020167 
  4. Shah, T. M., Nasika, D. P. B., & Otterpohl, R. (2021). Plant and Weed Identifier Robot as an Agroecological Tool Using Artificial Neural Networks for Image Identification. Agriculture, 11(3), 222. https://doi.org/10.3390/agriculture11030222 
  5. Stumme, J., Ashokkumar, O., Dillmann, S., Niestroj-Pahl, R., & Ernst, M. (2021). Theoretical Evaluation of Polyelectrolyte Layering during Layer-by-Layer Coating of Ultrafiltration Hollow Fiber Membranes. Membranes, 11(2), 106. https://doi.org/10.3390/membranes11020106 
  6. Minliang, C., Chengwei, M., Lin, C., & Zeng, A.-P. (2021). Integrated laboratory evolution and rational engineering of GalP/Glk-dependent Escherichia coli for higher yield and productivity of L-tryptophan biosynthesis. Metabolic Engineering Communications, 12, e00167. https://doi.org/10.1016/j.mec.2021.e00167 
  7. Bletsos, G., Kühl, N., & Rung, T. (2021). Adjoint-based shape optimization for the minimization of flow-induced hemolysis in biomedical applications. Engineering Applications of Computational Fluid Mechanics, 15(1), 1095–1112. https://doi.org/10.1080/19942060.2021.1943532 
  8. Sohoo, I., Ritzkowski, M., Sohu, Z. A., Cinar, S. Ö., Chong, Z. K., & Kuchta, K. (2021). Estimation of Methane Production and Electrical Energy Generation from Municipal Solid Waste Disposal Sites in Pakistan. Energies, 14(9), 2444. https://doi.org/10.3390/en14092444 
  9. Al-Najjar, M. A. A., Athamneh, T., AbuTayeh, R., Basheti, I., Leopold, C., Gurikov, P., & Smirnova, I. (2021). Evaluation of the orally administered calcium alginate aerogel on the changes of gut microbiota and hepatic and renal function of Wistar rats. PLOS ONE, 16(4), e0247633. https://doi.org/10.1371/journal.pone.0247633 
  10. Fischer, S., Polster, V., Ruhr, M., Hube, R., & Morlock, M. M. (2021). Osteolysis following PE Wear of a Hastings Head on a Monoblock Hip Stem. Case Reports in Orthopedics, 2021, 1–7. https://doi.org/10.1155/2021/9989395 
  11. Shah, T. M., Tasawwar, S., & Otterpohl, R. (2021). Agroecology for Food and Water Security in Times of Climate Consciousness: A Bibliometric Analysis of Peer-Reviewed Literature Published from 1990 to 2020. Sustainability, 13(9), 5064. https://doi.org/10.3390/su13095064 
  12. Papangelo, A. (2021). On the Effect of a Rate-Dependent Work of Adhesion in the Detachment of a Dimpled Surface. Applied Sciences, 11(7), 3107. https://doi.org/10.3390/app11073107 
  13. Ihrens, J., Möws, S., Wilkening, L., Kern, T. A., & Becker, C. (2021). The Impact of Time Delays for Power Hardware-in-the-Loop Investigations. Energies, 14(11), 3154. https://doi.org/10.3390/en14113154 
  14. Nagi, A., Schroeder, M., & Kersten, W. (2021). Risk Management in Seaports: A Community Analysis at the Port of Hamburg. Sustainability, 13(14), 8035. https://doi.org/10.3390/su13148035 
  15. Aslam, M. M.-A., Kuo, H.-W., Den, W., Usman, M., Sultan, M., & Ashraf, H. (2021). Functionalized Carbon Nanotubes (CNTs) for Water and Wastewater Treatment: Preparation to Application. Sustainability, 13(10), 5717. https://doi.org/10.3390/su13105717 
  16. Gronwald, P.-O., & Kern, T. A. (2021). Experimental Validation and Parameter Study of a 2D Geometry-Based, Flexible Designed Thermal Motor Model for Different Cooled Traction Motor Drives. World Electric Vehicle Journal, 12(2), 76. https://doi.org/10.3390/wevj12020076 
  17. Khan, M. U., Ahmad, M., Sultan, M., Sohoo, I., Ghimire, P. C., Zahid, A., Sarwar, A., Farooq, M., Sajjad, U., Abdeshahian, P., & Yousaf, M. (2021). Biogas Production Potential from Livestock Manure in Pakistan. Sustainability, 13(12), 6751. https://doi.org/10.3390/su13126751 
  18. Abis, M., Bruno, M., Simon, F.-G., Grönholm, R., Hoppe, M., Kuchta, K., & Fiore, S. (2021). A Novel Dry Treatment for Municipal Solid Waste Incineration Bottom Ash for the Reduction of Salts and Potential Toxic Elements. Materials, 14(11), 3133. https://doi.org/10.3390/ma14113133 
  19. Langer, C., & Ay, N. (2021). How Morphological Computation Shapes Integrated Information in Embodied Agents. Frontiers in Psychology, 12, 716433. https://doi.org/10.3389/fpsyg.2021.716433 
  20. Konow, T., Bätz, J., Beverland, D., Board, T., Lampe, F., Püschel, K., & Morlock, M. M. (2022). Variability in Femoral Preparation and Implantation Between Surgeons Using Manual and Powered Impaction in Total Hip Arthroplasty. Arthroplasty Today, 14, 14–21. https://doi.org/10.1016/j.artd.2021.10.005 
  21. Picuno, C., Van Eygen, E., Brouwer, M. T., Kuchta, K., & Thoden van Velzen, E. U. (2021). Factors Shaping the Recycling Systems for Plastic Packaging Waste—A Comparison between Austria, Germany and The Netherlands. Sustainability, 13(12), 6772. https://doi.org/10.3390/su13126772 
  22. Gaafar, M. A., Renner, H., Eich, M., & Petrov, A. Yu. (2021). Fourier optics with linearly tapered waveguides: Light trapping and focusing. APL Photonics, 6(6), 066108. https://doi.org/10.1063/5.0050770 
  23. Dragutinović, N., Höfer, I., & Kaltschmitt, M. (2021). Fuel Improvement Measures for Particulate Matter Emission Reduction during Corn Cob Combustion. Energies, 14(15), 4548. https://doi.org/10.3390/en14154548 
  24. Drücker, S., Lüdeker, J. K., Blecken, M., Kurt, A., Betz, K., Kriegesmann, B., & Fiedler, B. (2022). Probabilistic analysis of additively manufactured polymer lattice structures. Materials & Design, 213, 110300. https://doi.org/10.1016/j.matdes.2021.110300 
  25. Conrad, M., & Smirnova, I. (2021). Counter-Current Suspension Extraction Process of Lignocellulose in Biorefineries to Reach Low Water Consumption, High Extraction Yields, and Extract Concentrations. Processes, 9(9), 1585. https://doi.org/10.3390/pr9091585 
  26. Thormann, L., Neuling, U., & Kaltschmitt, M. (2021). Opportunities and Challenges of the European Green Deal for the Chemical Industry: An Approach Measuring Innovations in Bioeconomy. Resources, 10(9), 91. https://doi.org/10.3390/resources10090091 
  27. Maruthavanan, D., Seibel, A., & Schlattmann, J. (2021). Fluid-Structure Interaction Modelling of a Soft Pneumatic Actuator. Actuators, 10(7), 163. https://doi.org/10.3390/act10070163 
  28. Sun, M., Ülker, Z., Chen, Z., Deeptanshu, S., Johannsen, M., Erkey, C., & Gurikov, P. (2021). Development and Validation of Retention Models in Supercritical Fluid Chromatography for Impregnation Process Design. Applied Sciences, 11(15), 7106. https://doi.org/10.3390/app11157106 
  29. Makama, A., Kuladinithi, K., & Timm-Giel, A. (2021). Wireless Geophone Networks for Land Seismic Data Acquisition: A Survey, Tutorial and Performance Evaluation. Sensors, 21(15), 5171. https://doi.org/10.3390/s21155171 
  30. Alassali, A., Picuno, C., Chong, Z. K., Guo, J., Maletz, R., & Kuchta, K. (2021). Towards Higher Quality of Recycled Plastics: Limitations from the Material’s Perspective. Sustainability, 13(23), 13266. https://doi.org/10.3390/su132313266 
  31. Spille, C., Tholan, V. P., Straiton, B., Johannsen, M., Hoffmann, M., Marashdeh, Q., & Schlüter, M. (2021). Electrical Capacitance Volume Tomography (ECVT) for Characterization of Additively Manufactured Lattice Structures (AMLS) in Gas-Liquid Systems. Fluids, 6(9), 321. https://doi.org/10.3390/fluids6090321 
  32. Buggisch, C., Gibhardt, D., Felmet, N., Tetzner, Y., & Fiedler, B. (2021). Strain sensing in GFRP via fully integrated carbon nanotube epoxy film sensors. Composites Part C: Open Access, 6, 100191. https://doi.org/10.1016/j.jcomc.2021.100191 
  33. Schroeter, B., Jung, I., Bauer, K., Gurikov, P., & Smirnova, I. (2021). Hydrophobic Modification of Biopolymer Aerogels by Cold Plasma Coating. Polymers, 13(17), 3000. https://doi.org/10.3390/polym13173000 
  34. Spalek, N., Brunow, J., Braun, M., & Rutner, M. (2021). WAAM-Fabricated Laminated Metal Composites. Metals, 11(12), 1948. https://doi.org/10.3390/met11121948 
  35. Song, S., Braun, M., Wiegard, B., Herrnring, H., & Ehlers, S. (2021). Combining H-Adaptivity with the Element Splitting Method for Crack Simulation in Large Structures. Materials, 15(1), 240. https://doi.org/10.3390/ma15010240 
  36. Sohoo, I., Ritzkowski, M., Guo, J., Sohoo, K., & Kuchta, K. (2022). Municipal Solid Waste Management through Sustainable Landfilling: In View of the Situation in Karachi, Pakistan. International Journal of Environmental Research and Public Health, 19(2), 773. https://doi.org/10.3390/ijerph19020773 
  37. Greve, E., Fuchs, C., Hamraz, B., Windheim, M., Rennpferdt, C., Schwede, L.-N., & Krause, D. (2022). Knowledge-Based Decision Support for Concept Evaluation Using the Extended Impact Model of Modular Product Families. Applied Sciences, 12(2), 547. https://doi.org/10.3390/app12020547 
  38. Onen Cinar, S., Nsair, A., Wieczorek, N., & Kuchta, K. (2022). Long-Term Assessment of Temperature Management in an Industrial Scale Biogas Plant. Sustainability, 14(2), 612. https://doi.org/10.3390/su14020612 
  39. Möller, J., & Pörtner, R. (2021). Digital Twins for Tissue Culture Techniques—Concepts, Expectations, and State of the Art. Processes, 9(3), 447. https://doi.org/10.3390/pr9030447 
  40. Sohrt, V., Hein, S. S. V., Nehlsen, E., Strotmann, T., & Fröhle, P. (2021). Model Based Assessment of the Reflection Behavior of Tidal Waves at Bathymetric Changes in Estuaries. Water, 13(4), 489. https://doi.org/10.3390/w13040489 
  41. Thelen, M., Bochud, N., Brinker, M., Prada, C., & Huber, P. (2021). Laser-excited elastic guided waves reveal the complex mechanics of nanoporous silicon. Nature Communications, 12(1), 3597. https://doi.org/10.1038/s41467-021-23398-0 
  42. Heuer, J., Kraus, Y., Vučak, M., & Zeng, A. (2022). Enhanced sequestration of carbon dioxide into calcium carbonate using pressure and a carbonic anhydrase from alkaliphilic Coleofasciculus chthonoplastes. Engineering in Life Sciences, 22(3–4), 178–191. https://doi.org/10.1002/elsc.202100033 
  43. Daniel Barros, M., Hotza, D., & Janssen, R. (2021). Colloidal processing and characterization of TiO 2 –MnO‐doped alumina/alumina slurries and tapes. International Journal of Ceramic Engineering & Science, 3(4), 173–179. https://doi.org/10.1002/ces2.10087 
  44. Daniel Barros, M., Hotza, D., & Janssen, R. (2021). Dopant diffusion at the interface of TiO 2 ‐MnO‐doped alumina/alumina layers in sintered laminates. International Journal of Ceramic Engineering & Science, 3(3), 105–112. https://doi.org/10.1002/ces2.10090 
  45. Hanschke, L., & Renner, C. (2021). EmRep: Energy management relying on state‐of‐charge extrema prediction. IET Computers & Digital Techniques, cdt2.12033. https://doi.org/10.1049/cdt2.12033 
  46. Zhang, C., Sharma, S., Wang, W., & Zeng, A. (2021). A novel downstream process for highly pure 1,3‐propanediol from an efficient fed‐batch fermentation of raw glycerol by Clostridium pasteurianum. Engineering in Life Sciences, 21(6), 351–363. https://doi.org/10.1002/elsc.202100012 
  47. Buggisch, C., Gagani, A., & Fiedler, B. (2021). Capacitance measurements on integrated conductors for detection of matrix cracks in GFRP. Functional Composite Materials, 2(1), 2. https://doi.org/10.1186/s42252-020-00013-x 
  48. Wang, S., Ma, C., & Zeng, A. (2021). Dynamic energy correlation analysis of E. coli aspartokinase III and alteration of allosteric regulation by manipulating energy transduction pathways. Engineering in Life Sciences, 21(5), 314–323. https://doi.org/10.1002/elsc.202000065 
  49. Arbter, P., Sabra, W., Utesch, T., Hong, Y., & Zeng, A. (2021). Metabolomic and kinetic investigations on the electricity‐aided production of butanol by Clostridium pasteurianum strains. Engineering in Life Sciences, 21(3–4), 181–195. https://doi.org/10.1002/elsc.202000035 
  50. Zhang, H., Li, Y., Nie, J., Ren, J., & Zeng, A.-P. (2020). Structure-based dynamic analysis of the glycine cleavage system suggests key residues for control of a key reaction step. Communications Biology, 3(1), 756. https://doi.org/10.1038/s42003-020-01401-6 
  51. Schellenberger, S., Shi, K., Steigleder, T., Malessa, A., Michler, F., Hameyer, L., Neumann, N., Lurz, F., Weigel, R., Ostgathe, C., & Koelpin, A. (2020). A dataset of clinically recorded radar vital signs with synchronised reference sensor signals. Scientific Data, 7(1), 291. https://doi.org/10.1038/s41597-020-00629-5 
  52. Würger, T., Feiler, C., Vonbun-Feldbauer, G. B., Zheludkevich, M. L., & Meißner, R. H. (2020). A first-principles analysis of the charge transfer in magnesium corrosion. Scientific Reports, 10(1), 15006. https://doi.org/10.1038/s41598-020-71694-4 
  53. Suleiman, M., Krüger, A., & Antranikian, G. (2020). Biomass-degrading glycoside hydrolases of archaeal origin. Biotechnology for Biofuels, 13(1), 153. https://doi.org/10.1186/s13068-020-01792-y

2020

  1. Abis, M., Bruno, M., Kuchta, K., Simon, F.-G., Grönholm, R., Hoppe, M., & Fiore, S. (2020). Assessment of the Synergy between Recycling and Thermal Treatments in Municipal Solid Waste Management in Europe. Energies, 13(23), 6412. https://doi.org/10.3390/en13236412 
  2. Alassali, A., Aboud, N., Kuchta, K., Jaeger, P., & Zeinolebadi, A. (2020). Assessment of Supercritical CO2 Extraction as a Method for Plastic Waste Decontamination. Polymers, 12(6), 1347. https://doi.org/10.3390/polym12061347 
  3. Alassali, A., Calmano, W., Gidarakos, E., & Kuchta, K. (2020). The degree and source of plastic recyclates contamination with polycyclic aromatic hydrocarbons. RSC Advances, 10(73), 44989–44996. https://doi.org/10.1039/D0RA08554E 
  4. Arbter, P., Sabra, W., Utesch, T., Hong, Y., & Zeng, A. (2020). Metabolomic and kinetic investigations on the electricity‐aided production of butanol by Clostridium pasteurianum strains. Engineering in Life Sciences, elsc.202000035. https://doi.org/10.1002/elsc.202000035 
  5. Ashraf, M. N., Mahmood, M. H., Sultan, M., Banaeian, N., Usman, M., Ibrahim, S. M., Butt, M. U. B. U., Waseem, M., Ali, I., Shakoor, A., & Khan, Z. M. (2020). Investigation of Input and Output Energy for Wheat Production: A Comprehensive Study for Tehsil Mailsi (Pakistan). Sustainability, 12(17), 6884. https://doi.org/10.3390/su12176884 
  6. Buchspies, B., Kaltschmitt, M., & Junginger, M. (2020). Straw utilization for biofuel production: A consequential assessment of greenhouse gas emissions from bioethanol and biomethane provision with a focus on the time dependency of emissions. GCB Bioenergy, 12(10), 789–805. https://doi.org/10.1111/gcbb.12734 
  7. Chirumamilla, M., Krishnamurthy, G. V., Rout, S. S., Ritter, M., Störmer, M., Petrov, A. Y., & Eich, M. (2020). Thermal stability of tungsten based metamaterial emitter under medium vacuum and inert gas conditions. Scientific Reports, 10(1), 3605. https://doi.org/10.1038/s41598-020-60419-2 
  8. Cinar, S., Cinar, S. O., Wieczorek, N., Sohoo, I., & Kuchta, K. (2021). Integration of Artificial Intelligence into Biogas Plant Operation. Processes, 9(1), 85. https://doi.org/10.3390/pr9010085 
  9. Dillmann, S., Kaushik, S. A., Stumme, J., & Ernst, M. (2020). Characterization and Performance of LbL-Coated Multibore Membranes: Zeta Potential, MWCO, Permeability and Sulfate Rejection. Membranes, 10(12), 412. https://doi.org/10.3390/membranes10120412 
  10. Dostal, L., Grossert, H., Duecker, D. A., Grube, M., Kreuter, D. C., Sandmann, K., Zillmann, B., & Seifried, R. (2020). Predictability of Vibration Loads From Experimental Data by Means of Reduced Vehicle Models and Machine Learning. IEEE Access, 8, 177180–177194. https://doi.org/10.1109/ACCESS.2020.3027499 
  11. Engelmann, C., Johannsen, J., Waluga, T., Fieg, G., Liese, A., & Bubenheim, P. (2020). A Multi-Enzyme Cascade for the Production of High-Value Aromatic Compounds. Catalysts, 10(10), 1216. https://doi.org/10.3390/catal10101216 
  12. Falk, M., Bauch, G., & Nissen, I. (2020). On Channel Codes for Short Underwater Messages. Information, 11(2), 58. https://doi.org/10.3390/info11020058 
  13. Gaafar, M. A., Holtorf, J., Eich, M., & Petrov, A. Yu. (2020). Pulse time reversal and stopping by a refractive index front. APL Photonics, 5(8), 080801. https://doi.org/10.1063/5.0007986 
  14. Gessert, N., Nielsen, M., Shaikh, M., Werner, R., & Schlaefer, A. (2020). Skin lesion classification using ensembles of multi-resolution EfficientNets with meta data. MethodsX, 7, 100864. https://doi.org/10.1016/j.mex.2020.100864 
  15. Griese, F., Latus, S., Schlüter, M., Graeser, M., Lutz, M., Schlaefer, A., & Knopp, T. (2020). In-Vitro MPI-guided IVOCT catheter tracking in real time for motion artifact compensation. PLOS ONE, 15(3), e0230821. https://doi.org/10.1371/journal.pone.0230821 
  16. Hackius, N., & Petersen, M. (2020). Translating High Hopes Into Tangible Benefits: How Incumbents in Supply Chain and Logistics Approach Blockchain. IEEE Access, 8, 34993–35003. https://doi.org/10.1109/ACCESS.2020.2974622 
  17. Hauke, J., Achter, S., & Meyer, M. (2020). Theory Development Via Replicated Simulations and the Added Value of Standards. Journal of Artificial Societies and Social Simulation, 23(1), 12. https://doi.org/10.18564/jasss.4219 
  18. Kashif, M., Niaz, H., Sultan, M., Miyazaki, T., Feng, Y., Usman, M., Shahzad, M. W., Niaz, Y., M. Waqas, M., & Ali, I. (2020). Study on Desiccant and Evaporative Cooling Systems for Livestock Thermal Comfort: Theory and Experiments. Energies, 13(11), 2675. https://doi.org/10.3390/en13112675 
  19. Khan, S. U., Farooqi, I. H., Usman, M., & Basheer, F. (2020). Energy Efficient Rapid Removal of Arsenic in an Electrocoagulation Reactor with Hybrid Fe/Al Electrodes: Process Optimization Using CCD and Kinetic Modeling. Water, 12(10), 2876. https://doi.org/10.3390/w12102876 
  20. Kötter, B., Karsten, J., Körbelin, J., & Fiedler, B. (2020). CFRP Thin-Ply Fibre Metal Laminates: Influences of Ply Thickness and Metal Layers on Open Hole Tension and Compression Properties. Materials, 13(4), 910. https://doi.org/10.3390/ma13040910 
  21. Kröning, K., Krause, B., Pötschke, P., & Fiedler, B. (2020). Nanocomposites with p- and n-Type Conductivity Controlled by Type and Content of Nanotubes in Thermosets for Thermoelectric Applications. Nanomaterials, 10(6), 1144. https://doi.org/10.3390/nano10061144 
  22. Kuhl, J., Ding, A., Ngo, N. T., Braschkat, A., Fiehler, J., & Krause, D. (2020). Design of Personalized Devices—The Tradeoff between Individual Value and Personalization Workload. Applied Sciences, 11(1), 241. https://doi.org/10.3390/app11010241 
  23. Levermann, P., Freiberger, F., Katha, U., Zaun, H., Möller, J., Hass, V. C., Schoop, K. M., Kuballa, J., & Pörtner, R. (2020). NMPC-Based Workflow for Simultaneous Process and Model Development Applied to a Fed-Batch Process for Recombinant C. glutamicum. Processes, 8(10), 1313. https://doi.org/10.3390/pr8101313 
  24. Möller, J., Bhat, K., Guhl, L., Pörtner, R., Jandt, U., & Zeng, A. (2020). Regulation of pyruvate dehydrogenase complex related to lactate switch in CHO cells. Engineering in Life Sciences, elsc.202000037. https://doi.org/10.1002/elsc.202000037 
  25. Noirungsee, N., Hackbusch, S., Viamonte, J., Bubenheim, P., Liese, A., & Müller, R. (2020). Influence of oil, dispersant, and pressure on microbial communities from the Gulf of Mexico. Scientific Reports, 10(1), 7079. https://doi.org/10.1038/s41598-020-63190-6 
  26. Nsair, A., Onen Cinar, S., Alassali, A., Abu Qdais, H., & Kuchta, K. (2020). Operational Parameters of Biogas Plants: A Review and Evaluation Study. Energies, 13(15), 3761. https://doi.org/10.3390/en13153761 
  27. Onen Cinar, S., Chong, Z. K., Kucuker, M. A., Wieczorek, N., Cengiz, U., & Kuchta, K. (2020). Bioplastic Production from Microalgae: A Review. International Journal of Environmental Research and Public Health, 17(11), 3842. https://doi.org/10.3390/ijerph17113842 
  28. Paraskevopoulou, P., Smirnova, I., Athamneh, T., Papastergiou, M., Chriti, D., Mali, G., Čendak, T., Raptopoulos, G., & Gurikov, P. (2020). Polyurea-crosslinked biopolymer aerogel beads. RSC Advances, 10(67), 40843–40852. https://doi.org/10.1039/D0RA07337G 
  29. Pileggi, S. F., Indorf, M., Nagi, A., & Kersten, W. (2020). CoRiMaS—An Ontological Approach to Cooperative Risk Management in Seaports. Sustainability, 12(11), 4767. https://doi.org/10.3390/su12114767 
  30. Raza, H. M. U., Ashraf, H., Shahzad, K., Sultan, M., Miyazaki, T., Usman, M., Shamshiri, R. R., Zhou, Y., & Ahmad, R. (2020). Investigating Applicability of Evaporative Cooling Systems for Thermal Comfort of Poultry Birds in Pakistan. Applied Sciences, 10(13), 4445. https://doi.org/10.3390/app10134445 
  31. Schellenberger, S., Shi, K., Steigleder, T., Malessa, A., Michler, F., Hameyer, L., Neumann, N., Lurz, F., Weigel, R., Ostgathe, C., & Koelpin, A. (2020). A dataset of clinically recorded radar vital signs with synchronised reference sensor signals. Scientific Data, 7(1), 291. https://doi.org/10.1038/s41597-020-00629-5 
  32. Schiller, L., Seibel, A., & Schlattmann, J. (2020). A Gait Pattern Generator for Closed-Loop Position Control of a Soft Walking Robot. Frontiers in Robotics and AI, 7, 87. https://doi.org/10.3389/frobt.2020.00087 
  33. Schlüter, M., Glandorf, L., Gromniak, M., Saathoff, T., & Schlaefer, A. (2020). Concept for Markerless 6D Tracking Employing Volumetric Optical Coherence Tomography. Sensors, 20(9), 2678. https://doi.org/10.3390/s20092678 
  34. Seibel, A., Yıldız, M., & Zorlubaş, B. (2020). A Gecko-Inspired Soft Passive Gripper. Biomimetics, 5(2), 12. https://doi.org/10.3390/biomimetics5020012 
  35. Shabir, F., Sultan, M., Niaz, Y., Usman, M., Ibrahim, S. M., Feng, Y., Naik, B. K., Nasir, A., & Ali, I. (2020). Steady-State Investigation of Carbon-Based Adsorbent–Adsorbate Pairs for Heat Transformation Application. Sustainability, 12(17), 7040. https://doi.org/10.3390/su12177040 
  36. Sohoo, I., Ritzkowski, M., Kuchta, K., & Cinar, S. Ö. (2020). Environmental Sustainability Enhancement of Waste Disposal Sites in Developing Countries through Controlling Greenhouse Gas Emissions. Sustainability, 13(1), 151. https://doi.org/10.3390/su13010151 
  37. Stark, M., Wang, L., Bauch, G., & Wesel, R. D. (2020). Decoding Rate-Compatible 5G-LDPC Codes With Coarse Quantization Using the Information Bottleneck Method. IEEE Open Journal of the Communications Society, 1, 646–660. https://doi.org/10.1109/OJCOMS.2020.2994048 
  38. Stender, M., Hoffmann, N., & Papangelo, A. (2020). The Basin Stability of Bi-Stable Friction-Excited Oscillators. Lubricants, 8(12), 105. https://doi.org/10.3390/lubricants8120105 
  39. Suleiman, M., Krüger, A., & Antranikian, G. (2020). Biomass-degrading glycoside hydrolases of archaeal origin. Biotechnology for Biofuels, 13(1), 153. https://doi.org/10.1186/s13068-020-01792-y
  40. Tadesse, Y. B., & Fröhle, P. (2020). Modelling of Flood Inundation due to Levee Breaches: Sensitivity of Flood Inundation against Breach Process Parameters. Water, 12(12), 3566. https://doi.org/10.3390/w12123566 
  41. Würger, T., Feiler, C., Vonbun-Feldbauer, G. B., Zheludkevich, M. L., & Meißner, R. H. (2020). A first-principles analysis of the charge transfer in magnesium corrosion. Scientific Reports, 10(1), 15006. https://doi.org/10.1038/s41598-020-71694-4 
  42. Yeo, D., Dongo, K., Mertenat, A., Lüssenhop, P., Körner, I., & Zurbrügg, C. (2020). Material Flows and Greenhouse Gas Emissions Reduction Potential of Decentralized Composting in Sub-Saharan Africa: A Case Study in Tiassalé, Côte d’Ivoire. International Journal of Environmental Research and Public Health, 17(19), 7229. https://doi.org/10.3390/ijerph17197229 
  43. Zhang, H., Li, Y., Nie, J., Ren, J., & Zeng, A.-P. (2020). Structure-based dynamic analysis of the glycine cleavage system suggests key residues for control of a key reaction step. Communications Biology, 3(1), 756. https://doi.org/10.1038/s42003-020-01401-6 
  44. Zitscher, T., Neuling, U., Habersetzer, A., & Kaltschmitt, M. (2020). Analysis of the German Industry to Determine the Resource Potential of CO2 Emissions for PtX Applications in 2017 and 2050. Resources, 9(12), 149. https://doi.org/10.3390/resources9120149 

2019

    1. Adami, M., & Seibel, A. (2019). On-Board Pneumatic Pressure Generation Methods for Soft Robotics Applications. Actuators, 8(1), 2. https://doi.org/10.3390/act8010002 
    2. Baltruschat, I. M., Nickisch, H., Grass, M., Knopp, T., & Saalbach, A. (2019). Comparison of Deep Learning Approaches for Multi-Label Chest X-Ray Classification. Scientific Reports, 9(1), 1–10. https://doi.org/10.1038/s41598-019-42294-8 
    3. Chen, M., Chen, L., & Zeng, A.-P. (2019). CRISPR/Cas9-facilitated engineering with growth-coupled and sensor-guided in vivo screening of enzyme variants for a more efficient chorismate pathway in E. coli. Metabolic Engineering Communications, 9, e00094. https://doi.org/10.1016/j.mec.2019.e00094 
    4. Chirumamilla, M., Krishnamurthy, G. V., Knopp, K., Krekeler, T., Graf, M., Jalas, D., … Eich, M. (2019). Metamaterial emitter for thermophotovoltaics stable up to 1400 °C. Scientific Reports, 9(1). https://doi.org/10.1038/s41598-019-43640-6 
    5. Didonna, M., Stender, M., Papangelo, A., Fontanela, F., Ciavarella, M., & Hoffmann, N. (2019). Reconstruction of Governing Equations from Vibration Measurements for Geometrically Nonlinear Systems. Lubricants, 7(8), 64. https://doi.org/10.3390/lubricants7080064 
    6. Doblies, A., Boll, B., & Fiedler, B. (2019). Prediction of Thermal Exposure and Mechanical Behavior of Epoxy Resin Using Artificial Neural Networks and Fourier Transform Infrared Spectroscopy. Polymers, 11(2), 363. https://doi.org/10.3390/polym11020363 
    7. Duecker, D. A., Geist, A. R., Kreuzer, E., & Solowjow, E. (2019). Learning Environmental Field Exploration with Computationally Constrained Underwater Robots: Gaussian Processes Meet Stochastic Optimal Control. Sensors, 19(9), 2094. https://doi.org/10.3390/s19092094 
    8. Erichsen, G., Zimmermann, T., & Kather, A. (2019). Effect of Different Interval Lengths in a Rolling Horizon MILP Unit Commitment with Non-Linear Control Model for a Small Energy System. Energies, 12(6), 1003. https://doi.org/10.3390/en12061003 
    9. Gnegel, S., Li, J., Mameka, N., Huber, N., & Düster, A. (2019). Numerical Investigation of Polymer Coated Nanoporous Gold. Materials, 12(13), 2178. https://doi.org/10.3390/ma12132178 
    10. Kluth, T., Szwargulski, P., & Knopp, T. (2019). Towards accurate modeling of the multidimensional magnetic particle imaging physics. New Journal of Physics, 21(10), 103032. https://doi.org/10.1088/1367-2630/ab4938 
    11. Müller, S. (2019). Flexible heuristic algorithm for automatic molecule fragmentation: Application to the UNIFAC group contribution model. Journal of Cheminformatics, 11(1). https://doi.org/10.1186/s13321-019-0382-3 
    12. Nguyen, A. M., & Seibel, A. (2019). Recycling-Oriented Design in Soft Robotics. Actuators, 8(3), 62. https://doi.org/10.3390/act8030062 
    13. Plunkett, A., Kröning, K., & Fiedler, B. (2019). Highly Optimized Nitrogen-Doped MWCNTs through In-Depth Parametric Study Using Design of Experiments. Nanomaterials, 9(4), 643. https://doi.org/10.3390/nano9040643 
    14. Rathjens, M., & Fieg, G. (2019). Cost-Optimal Heat Exchanger Network Synthesis Based on a Flexible Cost Functions Framework. Energies, 12(5), 784. https://doi.org/10.3390/en12050784 
    15. Saeed, M. A., & Kersten, W. (2019). Drivers of Sustainable Supply Chain Management: Identification and Classification. Sustainability, 11(4), 1137. https://doi.org/10.3390/su11041137 
    16. Schiller, L., Seibel, A., & Schlattmann, J. (2019). Toward a Gecko-Inspired, Climbing Soft Robot. Frontiers in Neurorobotics, 13, 106. https://doi.org/10.3389/fnbot.2019.00106 
    17. Schulz, S. (2019). On Using Inertial Measurement Units for Solving the Direct Kinematics Problem of Parallel Mechanisms. Robotics, 8(4), 99. https://doi.org/10.3390/robotics8040099 
    18. Schulz, S. (2019). Performance Evaluation of a Sensor Concept for Solving the Direct Kinematics Problem of General Planar 3-RPR Parallel Mechanisms by Using Solely the Linear Actuators’ Orientations. Robotics, 8(3), 72. https://doi.org/10.3390/robotics8030072 
    19. Shah, S. A. A., Stark, M., & Bauch, G. (2019). Coarsely Quantized Decoding and Construction of Polar Codes Using the Information Bottleneck Method. Algorithms, 12(9), 192. https://doi.org/10.3390/a12090192 
    20. Shang, G., Furlan, K. P., Zierold, R., Blick, R. H., Janßen, R., Petrov, A., & Eich, M. (2019). Transparency induced in opals via nanometer thick conformal coating. Scientific Reports, 9(1), 1–7. https://doi.org/10.1038/s41598-019-47963-2 
    21. Skorych, V., Das, N., Dosta, M., Kumar, J., & Heinrich, S. (2019). Application of Transformation Matrices to the Solution of Population Balance Equations. Processes, 7(8), 535. https://doi.org/10.3390/pr7080535 
    22. Timmerberg, S., Sanna, A., Kaltschmitt, M., & Finkbeiner, M. (2019). Renewable electricity targets in selected MENA countries – Assessment of available resources, generation costs and GHG emissions. Energy Reports, 5, 1470–1487. https://doi.org/10.1016/j.egyr.2019.10.003 

2018

  1. Fohrmann, L. S., Pitruzzello, G., Petrov, A. Y., & Eich, M. (2018). Coupling between multimode fibers and slab waveguides. Optics Express, 26(23), 30255–30266. https://doi.org/10.1364/OE.26.030255 
  2. Hoffmann, J., Schulz, K. M., Pitruzzello, G., Fohrmann, L. S., Petrov, A. Y., & Eich, M. (2018). Backscattering design for a focusing grating coupler with fully etched slots for transverse magnetic modes. Scientific Reports, 8(1), 17746. https://doi.org/10.1038/s41598-018-36082-z 
  3. Jalas, D., Schulz, K. M., Petrov, A. Y., & Eich, M. (2018). Emission enhancement in dielectric nanocomposites. Optics Express, 26(13), 16352–16364. https://doi.org/10.1364/OE.26.016352 
  4. Jia, Y., & Fiedler, B. (2018). Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites. Fibers, 6(3), 59. https://doi.org/10.3390/fib6030059 
  5. Kauer, F., & Turau, V. (2018). An analytical model for wireless mesh networks with collision-free TDMA and finite queues. EURASIP Journal on Wireless Communications and Networking, 2018(1), 149. https://doi.org/10.1186/s13638-018-1146-x 
  6. Klingert, F. M. A., & Meyer, M. (2018). Comparing Prediction Market Mechanisms: An Experiment-Based and Micro Validated Multi-Agent Simulation. Journal of Artificial Societies and Social Simulation, 21(1), 7. https://doi.org/10.18564/jasss.3577 
  7. Krull, A., Morlock, M. M., & Bishop, N. E. (2018). Maximizing the fixation strength of modular components by impaction without tissue damage. Bone & Joint Research, 7(2), 196–204. https://doi.org/10.1302/2046-3758.72.BJR-2017-0078.R2 
  8. Leopold, C., Harder, S., Philipkowski, T., Liebig, W. V., & Fiedler, B. (2018). Comparison of Analytical Approaches Predicting the Compressive Strength of Fibre Reinforced Polymers. Materials, 11(12), 2517. https://doi.org/10.3390/ma11122517 
  9. Lewandowsky, J., & Bauch, G. (2018). Information-Optimum LDPC Decoders Based on the Information Bottleneck Method. IEEE Access, 6, 4054–4071. https://doi.org/10.1109/ACCESS.2018.2797694 
  10. Maiwald, L., Lang, S., Jalas, D., Renner, H., Petrov, A. Y., & Eich, M. (2018). Ewald sphere construction for structural colors. Optics Express, 26(9), 11352–11365. https://doi.org/10.1364/OE.26.011352 
  11. Meeuw, H., Wisniewski, V. K., & Fiedler, B. (2018). Frequency or Amplitude?—Rheo-Electrical Characterization of Carbon Nanoparticle Filled Epoxy Systems. Polymers, 10(9), 999. https://doi.org/10.3390/polym10090999 
  12. Mora-Villalobos, J.-A., & Zeng, A.-P. (2018). Synthetic pathways and processes for effective production of 5-hydroxytryptophan and serotonin from glucose in Escherichia coli. Journal of Biological Engineering, 12, 3. https://doi.org/10.1186/s13036-018-0094-7 
  13. Preibisch, I., Niemeyer, P., Yusufoglu, Y., Gurikov, P., Milow, B., & Smirnova, I. (2018). Polysaccharide-Based Aerogel Bead Production via Jet Cutting Method. Materials, 11(8), 1287. https://doi.org/10.3390/ma11081287 
  14. Ramaswami, S., Behrendt, J., & Otterpohl, R. (2018). Comparison of NF-RO and RO-NF for the Treatment of Mature Landfill Leachates: A Guide for Landfill Operators. Membranes, 8(2), 17. https://doi.org/10.3390/membranes8020017 
  15. Schulz, K. M., Jalas, D., Petrov, A. Y., & Eich, M. (2018). Reciprocity approach for calculating the Purcell effect for emission into an open optical system. Optics Express, 26(15), 19247–19258. https://doi.org/10.1364/OE.26.019247 
  16. Seibel, A., & Schiller, L. (2018). Systematic engineering design helps creating new soft machines. Robotics and Biomimetics, 5(1), 5. https://doi.org/10.1186/s40638-018-0088-4 
  17. Seibel, A., Schulz, S., & Schlattmann, J. (2018). On the Direct Kinematics Problem of Parallel Mechanisms. https://doi.org/10.1155/2018/2412608 
  18. Shang, G., Maiwald, L., Renner, H., Jalas, D., Dosta, M., Heinrich, S., … Eich, M. (2018). Photonic glass for high contrast structural color. Scientific Reports, 8(1). https://doi.org/10.1038/s41598-018-26119-8 
  19. Stark, M., Lewandowsky, J., & Bauch, G. (2018). Information-Bottleneck Decoding of High-Rate Irregular LDPC Codes for Optical Communication Using Message Alignment. Applied Sciences, 8(10), 1884. https://doi.org/10.3390/app8101884

2017

    1. Aßmann, M., Mügge, C., Gaßmeyer, S. K., Enoki, J., Hilterhaus, L., Kourist, R., & Kara, S. (2017). Improvement of the Process Stability of Arylmalonate Decarboxylase by Immobilization for Biocatalytic Profen Synthesis. Frontiers in Microbiology, 8(448). https://doi.org/10.3389/fmicb.2017.00448 
    2. Augustin, T., Grunert, D., Langner, H. H., Haverkamp, V., & Fiedler, B. (2017). Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink. Advanced Manufacturing: Polymer & Composites Science, 1–10. https://doi.org/10.1080/20550340.2017.1362508 
    3. Brumm, J.-C., & Bauch, G. (2017). On the Placement of On-Body Antennas for Ultra Wideband Capsule Endoscopy. IEEE Access, 5, 10141–10149. https://doi.org/10.1109/ACCESS.2017.2706300  (Financed completely by tub., not DFG!)
    4. Buchspies, B., Thormann, L., Mbohwa, C., & Kaltschmitt, M. (2017). PGE Production in Southern Africa, Part II: Environmental Aspects. Minerals, 7(11), 225. https://doi.org/10.3390/min7110225 
    5. Duecker, D.-A., Geist, A. R., Hengeler, M., Kreuzer, E., Pick, M.-A., Rausch, V., & Solowjow, E. (2017). Embedded Spherical Localization for Micro Underwater Vehicles Based on Attenuation of Electro-Magnetic Carrier Signals. Sensors, 17(5), 959. https://doi.org/10.3390/s17050959 
    6. Fohrmann, L. S., Sommer, G., Pitruzzello, G., Krauss, T. F., Petrov, A. Y., & Eich, M. (2017). Integrating cell on chip—Novel waveguide platform employing ultra-long optical paths. APL Photonics, 2(9), 096102. https://doi.org/10.1063/1.5001486 
    7. Groeger, C., Wang, W., Sabra, W., Utesch, T., & Zeng, A.-P. (2017). Metabolic and proteomic analyses of product selectivity and redox regulation in Clostridium pasteurianum grown on glycerol under varied iron availability. Microbial Cell Factories, 16(64). https://doi.org/10.1186/s12934-017-0678-9 
    8. Hauke, J., Lorscheid, I., & Meyer, M. (2017). Recent Development of Social Simulation as Reflected in JASSS Between 2008 and 2014: A Citation and Co-Citation Analysis. Journal of Artificial Societies and Social Simulation, 20(1), 5. https://doi.org/10.18564/jasss.3238 
    9. Hellmers, S., & Fröhle, P. (2017). Integrating Local Scale Drainage Measures in Meso Scale Catchment Modelling. Water, 9(2), 71. https://doi.org/10.3390/w9020071 
    10. Hezaveh, S., Zeng, A.-P., & Jandt, U. (2017). Investigation of Core Structure and Stability of Human Pyruvate Dehydrogenase Complex: A Coarse-Grained Approach. ACS Omega, 2(3), 1134–1145. https://doi.org/10.1021/acsomega.6b00386 
    11. Husser, E., & Bargmann, S. (2017). The Role of Geometrically Necessary Dislocations in Cantilever Beam Bending Experiments of Single Crystals. Materials, 10(3), 289. https://doi.org/10.3390/ma10030289 
    12. Jalas, D., Shao, L.-H., Canchi, R., Okuma, T., Lang, S., Petrov, A., & Eich, M. (2017). Electrochemical tuning of the optical properties of nanoporous gold. Scientific Reports, 7, 44139. https://doi.org/10.1038/srep44139 
    13. Lang, S., Sharma, G., Molesky, S., Kränzien, P. U., Jalas, T., Jacob, Z., … Eich, M. (2017). Dynamic measurement of near-field radiative heat transfer. Scientific Reports, 7(1), 13916. https://doi.org/10.1038/s41598-017-14242-x 
    14. Leopold, C., Schütt, M., Liebig, W., Philipkowski, T., Kürten, J., Schulte, K., & Fiedler, B. (2017). Compression Fracture of CFRP Laminates Containing Stress Intensifications. Materials, 10(9), 1039. https://doi.org/10.3390/ma10091039 
    15. Sabra, W., Bommareddy, R. R., Maheshwari, G., Papanikolaou, S., & Zeng, A.-P. (2017). Substrates and oxygen dependent citric acid production by Yarrowia lipolytica: insights through transcriptome and fluxome analyses. Microbial Cell Factories, 16(78). https://doi.org/10.1186/s12934-017-0690-0 
    16. Schäfers, C., Blank, S., Wiebusch, S., Elleuche, S., & Antranikian, G. (2017). Complete genome sequence of Thermus brockianus GE-1 reveals key enzymes of xylan/xylose metabolism. Standards in Genomic Sciences, 12, 22. https://doi.org/10.1186/s40793-017-0225-7 
    17. Song, L., & Zeng, A.-P. (2017). Engineering ‘cell robots’ for parallel and highly sensitive screening of biomolecules under in vivo conditions. Scientific Reports, 7(1), 15145. https://doi.org/10.1038/s41598-017-15621-0 
    18. Thormann, L., Buchspies, B., Mbohwa, C., & Kaltschmitt, M. (2017). PGE Production in Southern Africa, Part I: Production and Market Trends. Minerals, 7(11), 224. https://doi.org/10.3390/min7110224 


2016

  1. Barshakh, I., & Elleuche, S. (2016). Is it possible to optimize the protein production yield by the generation of homomultimeric fusion enzymes? SpringerPlus, 5(1), 316. https://doi.org/10.1186/s40064-016-1968-0 
  2. Lipka, T., Moldenhauer, L., Müller, J., & Trieu, H. K. (2016). Photonic integrated circuit components based on amorphous silicon-on-insulator technology. Photonics Research, 4(3), 126. https://doi.org/10.1364/PRJ.4.000126 
  3. Rohrdantz, B., Kuhlmann, K., Stark, A., Geise, A., & Jacob, A. F. (2016). Digital beamforming antenna array with polarisation multiplexing for mobile high-speed satellite terminals at Ka-band. The Journal of Engineering, (February). https://doi.org/10.1049/joe.2015.0163 
  4. Sáinz Bernat, N., Schulte, F., Voß, S., & Böse, J. (2016). Empty Container Management at Ports Considering Pollution, Repair Options, and Street-Turns. Mathematical Problems in Engineering, 2016, 1–13. https://doi.org/10.1155/2016/3847163

2015

  1. Dhas, P. G. T. N., Gulyas, H., & Otterpohl, R. (2015). Impact of Powdered Activated Carbon and Anion Exchange Resin on Photocatalytic Treatment of Textile Wastewater. Journal of Environmental Protection, 06(03), 191–203. https://doi.org/10.4236/jep.2015.63020 
  2. Dyachenko, P. N., Rosário, J. J. do, Leib, E. W., Petrov, A. Y., Störmer, M., Weller, H., … Eich, M. (2015). Tungsten band edge absorber/emitter based on a monolayer of ceramic microspheres. Optics Express, 23(19), A1236–A1244. https://doi.org/10.1364/OE.23.0A1236 
  3. Fohrmann, L. S., Petrov, A. Y., Lang, S., Jalas, D., Krauss, T. F., & Eich, M. (2015). Single mode thermal emission. Optics Express, 23(21), 27672. https://doi.org/10.1364/OE.23.027672 
  4. Gaffron, P., & Niemeier, D. (2015). School Locations and Traffic Emissions — Environmental (In)Justice Findings Using a New Screening Method. International Journal of Environmental Research and Public Health, 12(2), 2009–2025. https://doi.org/10.3390/ijerph120202009 
  5. Gerstein, G., Klusemann, B., Bargmann, S., & Schaper, M. (2015). Characterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple Shear. Materials, 8(1), 285–301. https://doi.org/10.3390/ma8010285 
  6. Gomes, D. R., Hallmann, S., Daniel, C., Fredel, M. C., & Janssen, R. (2015). Surface morphology and fracture strength analysis of nanosecond ablated alumina. Journal of the Ceramic Society of Japan, 123(1435), 160–166. https://doi.org/10.2109/jcersj2.123.160 
  7. Lipka, T., Moldenhauer, L., Müller, J., & Trieu, H. K. (2015). Athermal and wavelength-trimmable photonic filters based on TiO2-cladded amorphous-SOI. Optics Express, 23(15), 20075–20088. https://doi.org/10.1364/OE.23.020075 
  8. Lipka, T., Moldenhauer, L., Müller, J., & Trieu, H. K. (2015). Energy-Efficient Wavelength Multiplexers Based on Hydrogenated Amorphous Silicon Resonators. IEEE Photonics Journal, 7(5), 6600211. https://doi.org/10.1109/JPHOT.2015.2487139 
  9. Neddersen, M., & Elleuche, S. (2015). Fast and reliable production, purification and characterization of heat-stable, bifunctional enzyme chimeras. AMB Express, 5(1), 33. https://doi.org/10.1186/s13568-015-0122-7 
  10. Schröder, C., Blank, S., & Antranikian, G. (2015). First glycoside hydrolase family 2 enzymes from Thermus antranikianii and Thermus brockianus with β-glucosidase activity. Frontiers in Bioengineering and Biotechnology, 3, 76. https://doi.org/10.3389/fbioe.2015.00076 
  11. Schulz, K. M., Prorok, S., Jalas, D., Marder, S. R., Luo, J., Jen, A. K.-Y., … Eich, M. (2015). Mechanism that governs the electro-optic response of second-order nonlinear polymers on silicon substrates. Optical Materials Express, 5(8), 1653–1660. https://doi.org/10.1364/OME.5.001653 
  12. Seibel, A., & Schlattmann, J. (2015). An Analytical Approach to Evaluating Nonmonotonic Functions of Fuzzy Numbers. Advances in Fuzzy Systems, 2015, e898651. https://doi.org/10.1155/2015/898651 
  13. Witt, F., Gührs, J., Morlock, M. M., & Bishop, N. E. (2015). Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses. PLoS ONE, 10(8), e0135517. https://doi.org/10.1371/journal.pone.0135517 
  14. Wycisk, E., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2015). Fatigue performance of laser additive manufactured Ti-6Al-4V in very high cycle fatigue (VHCF) regime up to 109 cycles. Frontiers in Materials : Structural Materials, 2(72). https://doi.org/10.3389/fmats.2015.00072

2014

  1. Basner, A., & Antranikian, G. (2014). Isolation and Biochemical Characterization of a Glucose Dehydrogenase from a Hay Infusion Metagenome. PLoS ONE, 9(1), e85844. https://doi.org/10.1371/journal.pone.0085844 
  2. Gulyas, H., Zhang, S., & Otterpohl, R. (2014). Pretreating Stored Human Urine for Solar Evaporation by Low-Technology Ammonia Stripping. Journal of Environmental Protection, 05(11), 962–969. https://doi.org/10.4236/jep.2014.511097 
  3. Lipka, T., Kiepsch, M., Trieu, H. K., & Müller, J. (2014). Hydrogenated amorphous silicon photonic device trimming by UV-irradiation. Optics Express, 22(10), 12122–12132. https://doi.org/10.1364/OE.22.012122 
  4. Liriano-Jorge, C. F., Sohmen, U., Özkan, A., Gulyas, H., & Otterpohl, R. (2014). TiO2 Photocatalyst Nanoparticle Separation: Flocculation in Different Matrices and Use of Powdered Activated Carbon as a Precoat in Low-Cost Fabric Filtration. Advances in Materials Science and Engineering, 2014, Article ID 602495. https://doi.org/10.1155/2014/602495 
  5. Malsch, T., & Rebenstorf, H. (2014). A Tale of Three Cities – Urban Culture and Social Change in the Palestinian West Bank. Open Journal of Social Science Research, 2(1), 1–16. https://doi.org/10.15480/882.1645  (Formerly accessible via https://doi.org/10.12966/ojssr.03.01.2014)
  6. Schedler, M., Hiessl, R., Juárez, A. G. V., Gust, G., & Müller, R. (2014). Effect of high pressure on hydrocarbon-degrading bacteria. AMB Express, 4(1), 77. https://doi.org/10.1186/s13568-014-0077-0 
  7. Scheffler, A., Roth, T., & Ahlf, W. (2014). Sustainable decision making under uncertainty: a case study in dredged material management. Environmental Sciences Europe, 26(1), 1–12. https://doi.org/10.1186/2190-4715-26-7 
  8. Seibel, A., & Schlattmann, J. (2014). An Extended Analytical Approach to Evaluating Monotonic Functions of Fuzzy Numbers. Advances in Fuzzy Systems, 2014, 1–9. https://doi.org/10.1155/2014/892363 
  9. Sudhakar, P., Reck, M., Wang, W., He, F. Q., Dobler, I. W., & Zeng, A.-P. (2014). Construction and verification of the transcriptional regulatory response network of Streptococcus mutans upon treatment with the biofilm inhibitor carolacton. BMC Genomics, 15(1), 362. https://doi.org/10.1186/1471-2164-15-362 
  10. Ulchenko, E. A., Jalas, D., Petrov, A. Y., Muñoz, M. C., Lang, S., & Eich, M. (2014). Pulse compression and broadening by reflection from a moving front of a photonic crystal. Optics Express, 22(11), 13280. https://doi.org/10.1364/OE.22.013280

2013

  1. Dietz, D., Sabra, W., & Zeng, A.-P. (2013). Co-cultivation of Lactobacillus zeae and Veillonella cricetifor the production of propionic acid. AMB Express, 3(1), 29. https://doi.org/10.1186/2191-0855-3-29 
  2. Gulyas, H., Jorge, C. F. L., Reich, M., & Otterpohl, R. (2013). Reclaiming Biologically Pretreated Greywater for Reuse by Photocatalytic Oxidation: Qualitative Study on the Removal of Trace Organics. Journal of Water Resource and Protection, 05(06), 568–584. https://doi.org/10.4236/jwarp.2013.56058 
  3. Marcinczak, J. M., & Grigat, R.-R. (2013). Closed Contour Specular Reflection Segmentation in Laparoscopic Images. International Journal of Biomedical Imaging, 2013. https://doi.org/10.1155/2013/593183 

 

Scroll to Top